ER605 V2 + OC200 DHCP reservation not working too
Current setup is:
OC200 Controller
ER605 V2 router running latest 2.0.1 Firmware
3 x EAP225 Outdoor
22 Pieces Tplink Tapo Camera (15 C320WS + 7 C210)
As reported with other users of ER605 + Oc200 omada system DHCP reservation is not working and from time to time gives another random ip address to the surveillance cameras installed (22 pieces ALL Tplink wifi ip cameras)
I need the dhcp reservation to be not buggy because all my cameras is being recorded by a NVR. So giving a random ip address results in a black screen on the specific camera. Really frustrating. Please tplink give us the enterprise grade reliability that we need. I was really rooting for this all omada network system but this is a big let down :(
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @d0ugmac1, @BryanMania,
d0ugmac1 wrote
The Beta fw fixes an issue which was introduced? in the V1 1.2.1 build. The previous 1.2.0 build did not have this issue...and the build date of 1.2.0 roughly matches the build date (Jan 2022) of V2's 2.0.0 build (bit of a stretch, but something to try now). If you can downgrade that might be a temp fix while we wait to hear back from @Fae on plans for the V2 firmware?
The new Beta firmware provided in this solution post can fix the DHCP Reservation issue on both 1.2.0 (or 2.0.1) and 1.2.1 firmware.
And the beta firmware for ER7206 v1 and ER605 v2 has just been provided, thank you for your attention!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
...and I missed that detail, sorry!
The Beta fw fixes an issue which was introduced? in the V1 1.2.1 build. The previous 1.2.0 build did not have this issue...and the build date of 1.2.0 roughly matches the build date (Jan 2022) of V2's 2.0.0 build (bit of a stretch, but something to try now). If you can downgrade that might be a temp fix while we wait to hear back from @Fae on plans for the V2 firmware?
- Copy Link
- Report Inappropriate Content
Dear @d0ugmac1, @BryanMania,
d0ugmac1 wrote
The Beta fw fixes an issue which was introduced? in the V1 1.2.1 build. The previous 1.2.0 build did not have this issue...and the build date of 1.2.0 roughly matches the build date (Jan 2022) of V2's 2.0.0 build (bit of a stretch, but something to try now). If you can downgrade that might be a temp fix while we wait to hear back from @Fae on plans for the V2 firmware?
The new Beta firmware provided in this solution post can fix the DHCP Reservation issue on both 1.2.0 (or 2.0.1) and 1.2.1 firmware.
And the beta firmware for ER7206 v1 and ER605 v2 has just been provided, thank you for your attention!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Fae After whole day spent with stubborn IoT devices, which - despite of IP reservations done in Omada controller - got different IPs after AI WiFi optimization, at last I've found this thread and downloaded beta firmware for my ER605 v1.
Now it works like a charm. Just wanted to thank you :)
- Copy Link
- Report Inappropriate Content
Dear @maczek,
maczek wrote
@Fae After whole day spent with stubborn IoT devices, which - despite of IP reservations done in Omada controller - got different IPs after AI WiFi optimization, at last I've found this thread and downloaded beta firmware for my ER605 v1.
Now it works like a charm. Just wanted to thank you :)
You're welcome, and thank you for your valued feedback.
Glad to hear that your concern was resolved finally, hope you enjoy and have a wonderful day!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1003
Replies: 8
Voters 0
No one has voted for it yet.