PoE not providing IP Address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

PoE not providing IP Address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
PoE not providing IP Address
PoE not providing IP Address
2022-10-24 15:58:09
Model: OC200  
Hardware Version: V2
Firmware Version: 5.5.7

I have successfully set up my OC200 with an ER605 Router, JetStream Switch, and an EAP 610.  Everything works.

Ideally, I would like to power my OC200 with PoE only, but for whatever reason, I need to have it connected to USB power and the second Ethernet port to get an IP address from the router.

What am I doing wrong?  The controller is connected to the first PoE+ port on the JetStream switch. Am I just being impatient as it takes its time to start up?

I know it takes 3-4 minutes, per the landing page on the controller, to log into it locally once the IP address is acquired.

 

Thanks in advance for any ideas!

  0      
  0      
#1
Options
1 Reply
Re:PoE not providing IP Address
2022-10-25 07:29:52

  @michaeltheyeti 

 

Maybe the Ethernet cable issue, you can try another short Ethernet cable

  0  
  0  
#2
Options