ER605 V2_2.1.0 Beta Firmware Release (Jan 18th, 2023)- [Thread Closed]

ER605 V2_2.1.0 Beta Firmware Release (Jan 18th, 2023)- [Thread Closed]

ER605 V2_2.1.0 Beta Firmware Release (Jan 18th, 2023)- [Thread Closed]
ER605 V2_2.1.0 Beta Firmware Release (Jan 18th, 2023)- [Thread Closed]
2023-01-18 07:02:04 - last edited 2023-06-26 03:06:07
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.0_Build 20230117 (Beta)

Updated on Jan 30th 2023:

 

The official firmware 2.1.1 has just been released!

ER605 V2_2.1.1 Official Firmware (Released on Jan 30th, 2023)

 

Any further feedback, please feel free to Start a New Thread from HERE

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

 

This Article Applies to:

 

ER605(UN)_v2_2.1.0_Build 20230117 (Beta)

 

 

Release Notes:

 

  • New Feature/Enhancement

 

1. Add support GRE function in Standalone mode.

2. Add stateful ACL.

3. Add mDNS Repeater .

4. Add support for setting port speed and duplex mode in Controller mode.

5. Add support for setting port mirroring in Controller mode.

6. Optimized the logic of judging Me in ACL. If you need to use ACL to restrict the connection to VPN client, please select Me in Destination. Please note that if Me is included before the upgrade, the client may not be able to access the Web UI after the upgrade.

7. Add support for displaying the Source IP address of large Ping attack packets.

8. Add Non-Address mode for IPv6.

9. Optimized the DNS settings on the WAN side, the WAN side cannot set the DNS Server of the same network segment as the LAN.

10. Add IP-MAC binding in Controller mode.

11. Add One-to-One NAT in Controller mode.

12. DHCP Server's DNS support for adding network addresses.

13. Add "Certificate + Account" mode for OpenVPN.

14. Add support to customize DNS server for VPN servers in Controller mode.

15. Add "Custom IP" type for Local Networks in Controller mode.

16. Add "IP Address Range" type to VPN IP Pool in Controller mode.

17. Add support for custom Local IP Address for L2TP/PPTP VPN Users in Controller mode.

18. Add RIP and OSPF dynamic routing function in Standalone mode.

19. Add support for CLI configuration in Standalone mode.

20. Add the function of USB port storage in Standalone mode.  It is used to backup the configuration and log of the device.

21. Add Reboot Schedule in Standalone mode.

22. Add DHCPv6 PD Server in Standalone mode.

23. Add support for DHCP Option field.

  • Option 2: Time Offset
  • Option 42: NTP Server Network Boot,
  • Option 67: TFTP Server
  • Option 252: WPAD URL
  • DHCP Options Customization

24. Add MRU Configuration for PPPoE.

25. Add Full mode for OpenVPN.

26. Add IPsec Failover function.

27. Add SHA2-384 and SHA2-512 for IPsec.

28. Add WireGuard VPN.

29. Add import DHCP Reservation Entry and export to IP-MAC Binding Entry.

30. Add Keywords mode for URL Filtering in Controller mode.

31. Add modification to port PVID in Controller mode.

32. Add Bonjour Service, Service, and Client Network options for mDNS.

33. Add Quality of Service function.

34. Add DDNS Customization.

35. Add DNS Proxy, with DNSSEC, DoH, and DoT supported.

36. Add LDAP Authentication for PPTP/L2TP/OpenVPN and Web Authentication. Web Authentication only support in Standalone mode.

37. Add Bridge VLAN: you can bind multiple VLANs with one LAN interface.

38. Add VoIP data only goes from a certain WAN port, and that WAN port only allows VoIP to pass through.

 

  • Bug Fixed

 

1. Fix the bug that DHCP address reservation does not take effect.

2. Fix the bug that DHCP Server cannot assign an IP address.

3. Fix the bug that when an IPsec VPN tunnel is established, connections unrelated to

the tunnel are deleted.

4. Fix the bug that shield! Up port scan security risks.

5. Fix the bug that after UPNP is enabled, the Loopback function does not take effect.

6. Fix the bug that the device reported abnormal information to the controller.

7. Fix the bug that failed to connect to Server as L2TP Client for the second time.

8. Fix the bug that IKEv2 IPsec VPN, device as responder side does not clear the old SA.

9. Fix the bug that Controller adoption failure or circular adoption.

10. Fix the bug that Policy Routing would affect Port Forwarding.

11. Fix the ACL related issues.

12. Fix the bug that abnormal port forwarding after WAN up.

13. Fix the bug of loop adoption in 5.7controller or below. Mentioned Here.

 

Direct Download:

 

ER605(UN)_v2_2.1.0_Build 20230117 (Beta)

Notes:

1. For ER605 v2.0 and v2.6 only.

2. The above beta firmware is adapted to Omada Controller v5.8.

3.Please be sure you have read the Beta Test Agreement before proceeding!

 

The official firmware 2.1.1 has been released!

ER605 V2_2.1.1 Official Firmware (Released on Jan 30th, 2023)

 

Feedback:

 

Any further feedback on the Beta firmware, please feel free to start a new thread from HERE.

 

When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:

-- Management mode (Controller or Standalone)

-- Device Model(s) and Hardware

-- Device Firmware (previous and current)

 

Thank you in advance for your great cooperation and support!

  4      
  4      
#1
Options
1 Accepted Solution
Re:ER605 V2_2.1.0 Beta Firmware Release (Jan 18th, 2023)-Solution
2023-01-30 11:16:45 - last edited 2023-01-30 11:16:56

 

Updated on Jan 30th 2023:

 

The official firmware 2.1.1 has just been released!

ER605 V2_2.1.1 Official Firmware (Released on Jan 30th, 2023)

 

Any further feedback, please feel free to Start a New Thread from HERE

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

 

 

Recommended Solution
  0  
  0  
#21
Options
27 Reply
Re:ER605 v2.0.1 Beta Firmware Release
2023-01-18 12:53:50 - last edited 2023-01-18 13:04:41

  @Hank21 

 

Thanks for the update

 

Its good seeing all the new features and options making there way on to these devices.  Ill set up my test system later and give this firmware a good test

 

Also, despite numerous requests here and in other parts of the forum, can we please get support for TP-Links own dynamic DNS baked into these routers, or at the very least give us the settings we need to input into the new "Custom DNS" option to make it work?  Its super annoying having to have an old Archer C6 at the end of my network whose only job is to update my DDNS

Owner of: ER605 v1, ER605 v2, ER7206 v1, SG1024DE v4.2 and AX53 v1
  2  
  2  
#2
Options
Re:ER605 v2.0.1 Beta Firmware Release
2023-01-18 14:42:20

  @Hank21 

 

This should be pinned at the top...  I just ran across this post thinking dang, glad I didnt miss this!

I can not teach anyone anything - I can only make them think - Socrates
  2  
  2  
#3
Options
Re:ER605 v2.0.1 Beta Firmware Release
2023-01-19 03:02:30

  @Hank21 should the post title be v2.1.0 instead of v2.0.1?

  1  
  1  
#4
Options
Re:ER605 v2.0.1 Beta Firmware Release
2023-01-19 05:24:17 - last edited 2023-01-19 05:24:36

  @Hank21 Is it safe to say that ER605 v1 users won't be receiving any more updates even though they are still available for purchase and it's almost impossible to determine which version you'll receive from most retailers?

  4  
  4  
#5
Options
Re:ER605 v2.0.1 Beta Firmware Release
2023-01-19 07:25:54 - last edited 2023-01-19 07:26:12

  @Hank21 

thank you for this beta version.

 

I tried doing the upgrade online using custom upgrade under Config while still connected to the controller (Utilizing the Connected Time window) I was able to successfully upload the beta file to the ER605 but unable to upgrade it.

 

 

 

I received the following error " Failed to upgrade No devices available to upgrade".

 

 

Appreciate you comments and recommendations

 

Best regards

  0  
  0  
#6
Options
Re:ER605 v2.0.1 Beta Firmware Release
2023-01-19 09:07:03

  @Hank21 

 

Ive been running this for about a day and overnight now, standalone mode.  Nothing weird to report so far.  VPNs inbound and outbound (server and client mode) working, i have a seperate DHCP server on my network so cant test that, but everything else seems OK

 

Just really, really want it to be able to manage my TP-Link DDNS rather than another old router somewhere.

 

The only oddity i found is that sometimes the WAN config page doesnt load properly, but reloading the page fixes it

Owner of: ER605 v1, ER605 v2, ER7206 v1, SG1024DE v4.2 and AX53 v1
  4  
  4  
#7
Options
Re:ER605 v2.0.1 Beta Firmware Release
2023-01-20 11:31:00

Will V1 have the new firmware with these new features? 

  4  
  4  
#8
Options
Re:ER605 v2.0.1 Beta Firmware Release
2023-01-21 15:16:56 - last edited 2023-01-21 15:17:16

  @Hank21 With the new firmware the adaption-loop is gone. But another thing is introduced. One or twice a day Omada register that all the network devices are disconnected. Then the ER605v2 (v2_2.1.0_Build 20230117 (Beta)) connect again (says the log), followed with all the network devices (many registrations in the log of connected devices). With firmware 2.0.1. Did it not happen. 

  0  
  0  
#9
Options
Re:ER605 v2.0.1 Beta Firmware Release
2023-01-21 19:27:53

  @Hank21 I have a question. Is wireguard client or server? I have a surfshark VPN and I have not been able to connect to it with wireguard, only with OPENVPN but the performance is very low. It seems that it only occupies one CPU core when it has 4 cores. Thanks

  0  
  0  
#10
Options
Re:ER605 v2.0.1 Beta Firmware Release
2023-01-23 06:30:26

  @Hank21 

Confirming successful remote Omada Controller upgrade from v2.0.1 to 2.1.0 Build 20230117 Rel.41103

 

WAN IPv6 (DHCPv6 Prefix Delegation 48) is now working, which was not previously.

Provider: Aussie Broadband.

  0  
  0  
#11
Options

Information

Helpful: 4

Views: 5970

Replies: 27