ER605v2 and HUAWEI E3372 4G USB@ PLUS PL ISP connection issue
Model: ER605 (TL-R605)
Hardware Version: V2
Firmware Version: 2.1.1 Build 20230115 Rel.77774
I have an HUAWEI E3372 4G USB Modem (model E3372-325) which is listed in the compatible USB modems (https://www.tp-link.com/ca/er605/compatibility/) and it works when I plug it directly into a computer.
When I plug into the ER605, the USB light is blinking red and green and the web interface shows "Identify successfully" but conection is never established. What do I need to make this work?
My settings:
Country: Poland, Mobile ISP: Plus, Config Type: AUTO, Authentication Type: AUTO, Connection Mode: Connect Automatically, Backup Mode: Always Link Primary
Router is connected to OMADA OC200 cotroler v5.7.6
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I have finally solved the issue. My modem is online. The key was to understand that modems on the TP-Link list have several sub model/types and only several types are working with ER605v2. I have tested 3 or 4 models and finally have recognized that it works with ALCATEL IK41VE1 as there is only one type of that modem. I recommend ALCATEL IK41VE1 for ER605v2 as this is not expensive LTE modem and it always works with ER605v2.
- Copy Link
- Report Inappropriate Content

Dear @screen123
1. Please disable Link Backup, and then check if you can receive Internet from the USB WAN;
2. Please try put in APN manually. According to Goolde result, Poland Plus APN is internet
We have a general troubleshooting guide, it's not for ER605 but all the steps are the same:
- Copy Link
- Report Inappropriate Content
I have confirmed modem configuration with ISP, updated settings as following but connection is not established. What do I need to make this work?
- Copy Link
- Report Inappropriate Content
... additionally I have noticed that Authentication type config required by ISP is "NONE" but there is no such option in ER605. How can I fix it?
ISP APN config:
- Copy Link
- Report Inappropriate Content
I have tested two supported GSM modems and 4 SIMs from different IPS vendors (PLUS, ORANGE, PLAY, T-MOBILE) Non is working on auto neither manual settings
After initiation of connection the IP address is not granted as there is not connection established. I'm going to check one more IPS - AERO2 - but I suppose that GSM option just doesn't work because of a non GSM related setting on the router. Can you help me as I don't have new idea how to solve it? APN settings are setup OK for sure.
- Copy Link
- Report Inappropriate Content
I have finally solved the issue. My modem is online. The key was to understand that modems on the TP-Link list have several sub model/types and only several types are working with ER605v2. I have tested 3 or 4 models and finally have recognized that it works with ALCATEL IK41VE1 as there is only one type of that modem. I recommend ALCATEL IK41VE1 for ER605v2 as this is not expensive LTE modem and it always works with ER605v2.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 583
Replies: 6
Voters 0
No one has voted for it yet.