hi guys,

i recently enlarged my omada network. Originally I had some EAPs, a  TL-SG2008P switch and an ER605 router. Due to lack of ports on the switch, I also used the LAN ports at the router. Yesterday I installed a  TL-SG2218 to increase the number of LAN ports. Now i was able to move the clients, connected to the router, to the new switch. Two of these devices had a static IP addresses (IoT devices, no separate VLAN). Since I plugged them into the new switch, they don't get a valid IP address. Neither the static IP works nor a dynamic one. When i reconnect them directly to the router they come back online (with dynamic IP only). I tried a lot of different things, like rebooting (both switch an router), resetting the router, blocking and unblocking of the two devices, connecting to different ports at the switch and the router. But actually I reached my limits and have no idea how to solve this issue.

I have also noticed, that it takes a lot of time to get the controller updated (i use the OC200 hardware controller). The map view takes minutes to get actualized and also the client list shows the wrong port for several minutes.

I really would appreciate to get some hints or tips, how to solve this issue. Thanks.