ER605 DHCP Reservations & Pool

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 DHCP Reservations & Pool

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 DHCP Reservations & Pool
ER605 DHCP Reservations & Pool
2023-03-07 17:26:23 - last edited 2023-04-14 04:04:48
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version:

Been a while since I was messing with DHCP since the reservations weren't holding. Upgraded today to the latest beta.

 

Having a brain glitch. Totally silly queston. I already have roughly 30 IPs reserved for my devices and am trying to get them all back where they belong. But I have about 20 other devices that are dynamically assigned, so I'm tripping over a few.

 

When I define the DHCP range, and I start, say, at 192.168.0.100 to free up the other dynamically assigned devices, my reserved addresses <.100 should all still hold, correct? Meaning, when I define the range, I can still use addresses outside the range, they just wont be dynamically assigned by the DHCP Server?

OC200, 2x SG-TL3428, T1500G-10MPS, 3x EAP225, Firewalla Gold (replaced ER-605)
  0      
  0      
#1
Options
1 Accepted Solution
Re:ER605 DHCP Reservations & Pool-Solution
2023-04-14 04:04:44 - last edited 2023-04-14 04:04:48

Hi @CoKro

 

A newer 1.2.3 Beta firmware has been released for trial, please follow the post link below for details.
ER605 V1_1.2.3_Build 20230413 Beta For Trial (Released on Apr 14th, 2023)

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#7
Options
6 Reply
Re:ER605 DHCP Reservations & Pool
2023-03-08 01:21:41 - last edited 2023-03-08 01:27:07

Hello @CoKro 

 

Did you upgrade to the ER605(UN)_V1_1.2.3 Build 20230224 (Beta)?

 

ER605 V1 1.2.0 firmware (adapted to Omada Controller 5.0.30) has added support for reserving IP addresses outside the DHCP Range. So I believe that you can configure reserved address outside the DHCP range if you use 1.2.0 or later firmware.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#2
Options
Re:ER605 DHCP Reservations & Pool
2023-03-08 13:18:15

  @Fae 

 

yes. The Feb 28th released beta.  ER605(UN)_V1_1.2.3 Build 20230224 (Beta)

 

OC200, 2x SG-TL3428, T1500G-10MPS, 3x EAP225, Firewalla Gold (replaced ER-605)
  0  
  0  
#3
Options
Re:ER605 DHCP Reservations & Pool
2023-03-09 02:21:56

Hello @CoKro 

 

Please reconnect a client device to check whether it can get the reserved IP address as expected. You can reconnect on the client device, or go to Clients for Reconnect. Thanks!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#4
Options
Re:ER605 DHCP Reservations & Pool
2023-03-10 18:29:18

  @Fae 

 

Thanks for the help. Can confirm that its working as expected. I started my range at x.x.x.100, with all of my reserved addresses between x.x.x.10 and x.x.x.99. 

Non-reserved devices are picking up IP addresses x.x.x.107 and x.x.x.113. 

OC200, 2x SG-TL3428, T1500G-10MPS, 3x EAP225, Firewalla Gold (replaced ER-605)
  0  
  0  
#5
Options
Re:ER605 DHCP Reservations & Pool
2023-03-13 03:12:49

Hello @CoKro 

 

Thank you for your reply. Glad to hear that it's working as expected now.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#6
Options
Re:ER605 DHCP Reservations & Pool-Solution
2023-04-14 04:04:44 - last edited 2023-04-14 04:04:48

Hi @CoKro

 

A newer 1.2.3 Beta firmware has been released for trial, please follow the post link below for details.
ER605 V1_1.2.3_Build 20230413 Beta For Trial (Released on Apr 14th, 2023)

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 1070

Replies: 6

Related Articles