Hardware Upgrade, Negotiated Speed 10mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Hardware Upgrade, Negotiated Speed 10mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hardware Upgrade, Negotiated Speed 10mbps
Hardware Upgrade, Negotiated Speed 10mbps
2023-03-17 07:59:02 - last edited 2023-03-20 07:49:59

Hello,

 

Recently did a hardware upgrade and got a MR600, TP 9 Switch POE for our setup that has 4 different AP's

 

 

Current issue is that all AP's connections seems to be limited to 10mbps (negotiated speed) on our Omada controller

(s

 

We live on a very off location so our speed usually lands around 50-150mbps

 

Current setup is

 

MR 600 (source) to 9 POE switch to  1. Controller 

                                                                     2. AP
                                                                     3. AP

                                                                     4.AP

                                                                     5. AP

 

Troubleshooting we've done so far is connected ethernet cable directly via MR 600 (source) to desktop and got around 40mbps

All AP's we get around 10mbps

Desktop to POE switch with ethernet we get 10mbps

 

Even changed the cable between MR 600 and POE switch and got the same result. (CAT 5/CAT 6)

 

Any suggestions?

 

 

 

 

 

 

  0      
  0      
#1
Options
1 Reply
Re:Hardware Upgrade, Negotiated Speed 10mbps
2023-03-20 08:02:11

Hello @Kaalz

 

It seems the speed is limited by your POE switch, because Desktop to POE switch with ethernet you get 10mbps.

You may see if your switch support 10M/100M/1000M, maybe you can tell me the model number.

 

If it is a managed switch, you can force the ports link speed to 100M/1000M.

 

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options