IPSEC VPN Very Slowly Speed
IPSEC VPN Very Slowly Speed
Hello.
I have a problem with IPSEC VPN tunnel Site-to-Site.
On the second site is the same router ER7206.
Tunnel is established.
Speed are about 2-3mb/s - must be 200 more.
Connection is 900/300 mb.
Help me please. What is reason?
When i tested iperf3 i have:
Like set -u preferred UDP and -b bandwith eg 100mb
It looks like that's going on.
One more test by setting the socket buffer size.
What settings must be for the best speed. Hmm.. MTU . MSS ??
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Du you use the router in stand alone or controller?
in stand alone there mybee not same screen
but you ned 1.3.0 sotware to get it to work with sha2 anyway.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Yes on ER605v2 not ER7206.
best speed on ER7206 is prety mutch what you have.. sorry but you can test with SHA256 and EAS256 dh14 to se difference.
on ER7206 I use SHA1 AES256 and dh2 for best speed.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Yepp 1-10 up and down up and down on the speed, but most about 3MB/s, Picture with 32MB/s was from ER605v2 to show the difference.
- Copy Link
- Report Inappropriate Content
so briefly explained, you want faster VPN then replace ER7206 with an ER605v2 or ER8411, I haven't tested it but ER707-M2 should be good too
- Copy Link
- Report Inappropriate Content
I get this from TP-Link support just now
Dear customer,
Yes, ER707-M2’s IPSec throughput is a lot better than ER7206 v1.
Max performance is around 600-800Mbps when using SHA1-AES128, SHA256 has similar performance as well.
Thanks!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2039
Replies: 20
Voters 0
No one has voted for it yet.