Business Community > Routers > ER605 V2 - PXE Boot not working?
< Routers

ER605 V2 - PXE Boot not working?

1234

ER605 V2 - PXE Boot not working?

ER605 V2 - PXE Boot not working?
ER605 V2 - PXE Boot not working?
2023-07-03 19:45:40 - last edited 2023-12-07 01:12:00
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.3

I migrated from a unifi system over to a tp-link ER605 as my unifi system couldn't support my new internet connection properly.

 

One thing that was setup and working was pxe booting.

 

I've tried setting this up within the ER605 but it doesn't seem to work correctly.

 

It picks up the boot file correctly but even if i put the correct address into what now states the "DHCP TFTP server" it still picks up the default gateway as the tftp server and just boot loops.

 

Has anyone been able to get this working correctly? or is there anyway to get around it?

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:ER605 V2 - PXE Boot not working?-Solution
2023-12-07 01:10:08 - last edited 2024-03-15 01:47:58

Hi everyone in this thread,

Clive_A wrote

Hi @Toast789 @mrdeadlocked @WindyBinDay @Springs42 

Confirmed w/ the dev that there will be a beta for standalone to have the next server. If you are using a controller, please let me know the controller version.

Future firmware updates for the router will resolve this issue. Please patiently wait for the future firmware updates.

Here's the beta firmware for you. Please download it here: download

It adds support to the next server in standalone mode. For anyone who uses a controller, this might not be as helpful. Please wait for the future firmware of the Omada Controller.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#13
Options
Re:ER605 V2 - PXE Boot not working?-Solution
2024-01-30 02:47:55 - last edited 2024-01-30 02:49:27

Hi @WallyJericho 

Thanks for posting in our business forum.

WallyJericho wrote

  @WallyJericho @Clive_A 

I installed firmware ER605 2.2.4 Build 20240119 Rel.44368 and TFTP server setting is still not working. 

 

 

 

It seems that the advanced LAN settings are completely ignored.

Am I missing a vital step?

 

 

 

If you are not reading the thread carefully, let me point you the issue.

 

 

 

You are NOT using the same firmware as they do.

And my previous reply was a beta firmware provided by the download link which has expired for a long long time. (7-day)

 

Here's the link I created again. Note that the firmware may not include the features you see on 2.2.4 now.

In addition, the official fix to this issue will come out on V5.15(ETA). Disclaimer, this is not a guarantee but informative use.

 

Expired before Feb 6th: https://we.tl/t-3q5Vycz4Kl

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#21
Options
37 Reply
Re:ER605 V2 - PXE Boot not working?
2023-07-04 02:37:09 - last edited 2023-07-04 02:58:04

  @Springs42 

is there any config you want to share with the community? hard to tell the reason without any further info.

 

use DHCP option 66 and 67, are you able to make it work flawlessly?

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#2
Options
Re:ER605 V2 - PXE Boot not working?
2023-07-04 08:40:56

  @Tedd404 

 

I've set the appropriate settings within the lan options which are below.

 

and this is what is seen on screen when trying to pxe boot

 

 

As you cans see it's picking up the default gateway when trying to use tftp

  0  
  0  
#3
Options
Re:ER605 V2 - PXE Boot not working?
2023-07-04 09:32:41 - last edited 2023-07-05 00:56:21

  @Springs42 

In the latest firmware with the controller, you have option 66 and 67. if you don't want to test that out, that'll be fine.

(note that the controller will reset your router after adoption)

 

in addition: https://blog.router-switch.com/2013/03/dhcp-option-150-dhcp-option-66/#:~:text=RFC%202132%20defines%20option%2066.&text=DHCP%20option%2066%20only%20supports,of%20a%20single%20TFTP%20server.&text=We%20can%20specify%20the%20next,the%20pool%20will%20be%20used

 

can you try setting up option 150 and dhcp tftp server? check again? 

if no, not sure which option is missing causing this problem. maybe controller mode can make it work

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#4
Options
Re:ER605 V2 - PXE Boot not working?
2023-10-06 01:54:04 - last edited 2023-10-06 02:17:31

I am having the same issue, option 66 is not working.

 

Router: ER605 v2.0      Firmware 2.1.2

Switch: TL-SG2008P v1.0           firmware 1.0.8

Omada Software Controller: 5.9.31

 

 

But when I send a PXE request I get the gateway address instead of the TFTP server address:

 

 

 

 

  0  
  0  
#5
Options
Re:ER605 V2 - PXE Boot not working?
2023-11-25 05:14:57
I have the same issue with this. Has anyone got this to work?
  0  
  0  
#6
Options
Re:ER605 V2 - PXE Boot not working?
2023-11-27 09:30:02

Any updates? I want to boot netboot xyz efi 

  0  
  0  
#7
Options
Re:ER605 V2 - PXE Boot not working?
2023-11-28 01:30:40

Hi @Toast789 @mrdeadlocked @WindyBinDay @Springs42 

Toast789 wrote

Any updates? I want to boot netboot xyz efi 

Thanks for posting in our business forum.

Have you double-checked your boot format?

There is a difference in the TFTP server you should access.

The standard format would be \smsboot\x64\abcd.efi

Have you set in this format and specified the path correctly?

Would love to see some screenshots from you.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#8
Options
Re:ER605 V2 - PXE Boot not working?
2023-11-28 16:43:24

  @Clive_A The problem is that the client doesn't get redirected to the designated TFTP server. The format for the boot/efi doesn't matter yet because the client is still being given the default gateway as the TFTP server address and not what is assigned in the DHCP Options.

  0  
  0  
#9
Options
Re:ER605 V2 - PXE Boot not working?
2023-11-28 18:10:17

  @mrdeadlocked 

 

See this thread https://community.tp-link.com/en/business/forum/topic/641862

 

A beta software is coming up with next-server support.

  0  
  0  
#10
Options
Re:ER605 V2 - PXE Boot not working?
2023-11-28 19:27:53
Good news! Thanks!
  0  
  0  
#11
Options
1234

Information

Helpful: 0

Views: 5723

Replies: 37

Related Articles
PXE Boot Bug
1604 0
ER605 V2 + OC200 DHCP reservation not working too
992 0
 PXE Boot is not working on Jetstream SG3428X v1.30
140 0
 PXE Boot on different VLAN
791 0
ER605 v2 firmware 2.1.1 DHCP not working in omada
2108 0
ER605 V2 wireguard
2484 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.