ER605 broken following upgrade
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
following firmware upgrade device no more boot normally, only last port working on device and now when i logs into device its header in the web page is WVR450G.
does someone got a clue of how to recover my router?
thank you
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
if you successfully entered the recovery mode, you should make it recover.
I highly recommend you read and follow the instruction carefully How to use the Emergency Mode to recovery the firmware for Omada Gateways
Failed to update firmware via Omada - WARNING it downloads wrong firmware
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
This is forum, and you get support from tp-link and other forum member here. but tecnical support do you find here. email support is problably the best for you
https://www.tp-link.com/en/support/contact-technical-support/#Forum-Support
- Copy Link
- Report Inappropriate Content
Hi @lolo32
Thanks for posting in our business forum.
This is not the technical support but the forum. If you need a phone call or chat support, even an email conversation, please go to the support page.
Regarding the broken firmware upgrade, what kind of version did you upgrade from? Ver and build.
Is your model ER605 V2?
Where did you get your firmware? And how did you install it?
What's the symptom of the router now judging from the LED? Are you saying only one port is working? Seems to be quite impossible if this is caused by a firmware upgrade. I've never seen a hardware issue caused by a firmware upgrade.
About your firmware recovery, do you have any pictures of your recovery process? What's the error you received on the recovery page?
- Copy Link
- Report Inappropriate Content
there is no way that the device header would be a Chinese model. that's strange. that model is wireless capable. do you have any screenshots to prove that?
- Copy Link
- Report Inappropriate Content
if you successfully entered the recovery mode, you should make it recover.
I highly recommend you read and follow the instruction carefully How to use the Emergency Mode to recovery the firmware for Omada Gateways
Failed to update firmware via Omada - WARNING it downloads wrong firmware
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1076
Replies: 8
Voters 0
No one has voted for it yet.