TP-Link ER605 V2 Fw ER605(UN)_V2_2.1.2 Build 20230210 VS ER605(UN)_V2_2.2.0 Build 20230629 Rel.64012

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link ER605 V2 Fw ER605(UN)_V2_2.1.2 Build 20230210 VS ER605(UN)_V2_2.2.0 Build 20230629 Rel.64012

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link ER605 V2 Fw ER605(UN)_V2_2.1.2 Build 20230210 VS ER605(UN)_V2_2.2.0 Build 20230629 Rel.64012
TP-Link ER605 V2 Fw ER605(UN)_V2_2.1.2 Build 20230210 VS ER605(UN)_V2_2.2.0 Build 20230629 Rel.64012
2023-08-13 06:46:36
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.2 Build 20230210

Hi all,

 

On my TP-Link ER605 V2 I was able to download and running Firmware 2.2.0 Build 20230629 Rel.64012. 

 

I configured it in backup mode - USB modem, I noted that when the main line drop and the USB connection take place, no DNS was provided by the 2nd connection so I lost Internet connection, it took a bit to understand why I was not able to browse Internet by 2nd line but I figured it out but finally I did it.

 

I checked the system logs and I saw good logs about when USB modem take place.

 

I moved to the support page do double check if a new firmware was available I discovered the my current firmware was not available anymore and last available is 2.1.2 Build 20230210.

 

I perform some internet research and I found this post:

 

https://community.tp-link.com/en/business/forum/topic/617892

 

So I downgraded the firmware to 2.1.2 Build 20230210. I did a drop main line test restoring the settings do retrieve DNS from the ISP from my devices, and main line and USB backup line are working correctly now.

 

Then I moved to the logs and I was surprised to see that compared to firmware 2.2.0 Build 20230629 Rel.64012 now I can just see: Wan down and Wan up and no track about USB back up on and USB back up off.

 

My question is: will a new Firmware possible with no bugs and good logs detail as 2.2.0 Build 20230629 Rel.64012 released soon?

  0      
  0      
#1
Options
3 Reply
Re:TP-Link ER605 V2 Fw ER605(UN)_V2_2.1.2 Build 20230210 VS ER605(UN)_V2_2.2.0 Build 20230629 Rel.64012
2023-08-13 07:40:18
  2  
  2  
#2
Options
Re:TP-Link ER605 V2 Fw ER605(UN)_V2_2.1.2 Build 20230210 VS ER605(UN)_V2_2.2.0 Build 20230629 Rel.64012
2023-08-14 18:42:53

  @MR.S 

 

Do you know when a stable firmware will be released? I would avoid to play with Beta for the moment since I had bad experience with the 2.2.0 one

 

Regards

  0  
  0  
#3
Options
Re:TP-Link ER605 V2 Fw ER605(UN)_V2_2.1.2 Build 20230210 VS ER605(UN)_V2_2.2.0 Build 20230629 Rel.64012
2023-08-15 05:50:19

  @Harlock 

 

stable versions are not something TP-Link has yet, so it's about finding a version that is the most stable :-)

I have tested the beta version and I think it works quite well.
but I have noticed the following.
very slow to start up, changes to many things take forever, e.g. adding router lan-lan ACL.

 

  0  
  0  
#4
Options