Limit bandwidth for a specific IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Limit bandwidth for a specific IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Limit bandwidth for a specific IP
Limit bandwidth for a specific IP
2023-09-06 10:11:43 - last edited 2023-09-10 20:07:31
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: 1.3.0

I have the following Omada system.

ER7207
switches
TL-SG3428XMP v1.0

and 3 APs.

Wireless clients can very practically throttle in bandwidth. Unfortunately, it is not so easy with individual PCs that are connected to the switch.

Can I assign a defined bandwidth to an IP (PC) address? In the bandwidth control mask, only IP masks (that is, entire areas or networks) are possible.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Limit bandwidth for a specific IP-Solution
2023-09-07 02:09:07 - last edited 2023-09-10 20:07:31

Hi @wendland 

Thanks for posting in our business forum.

Use IP Group then. e.g. 192.168.0.100/32 means the single IP address is effective. You should bind the IP and MAC address together. Or set a static IP to that computer.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:Limit bandwidth for a specific IP-Solution
2023-09-07 02:09:07 - last edited 2023-09-10 20:07:31

Hi @wendland 

Thanks for posting in our business forum.

Use IP Group then. e.g. 192.168.0.100/32 means the single IP address is effective. You should bind the IP and MAC address together. Or set a static IP to that computer.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:Limit bandwidth for a specific IP
2023-09-10 20:07:23

  @Clive_A 

 

Perfect, so easy. THX !

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 579

Replies: 2

Related Articles