Linking mesh extenders AC750 RE190

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Linking mesh extenders AC750 RE190

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Linking mesh extenders AC750 RE190
Linking mesh extenders AC750 RE190
2023-09-18 13:41:21 - last edited 2023-09-26 08:01:49
Model: Range Extender  
Hardware Version: V1
Firmware Version:

Hi - I have a tp link AX 1500 WiFi 6 router all up and running - I have tethered one to link mesh WiFi extender AC750 RE190 via the app and all ok . However I need to use more extenders to get the signal around the house as it's old and thick walls and I can not see how to add further identical extenders - any help would be appreciated many thanks 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Linking mesh extenders AC750 RE190-Solution
2023-09-18 17:23:36 - last edited 2023-09-26 08:01:49

  @Vikbe 

 

Hi,

 

Adding more extenders shouldn't be different than adding the first extender.

 

Where exactly have you got stuck in the process?

 

If the other extenders cannot be found, then maybe they are too far away? Place them near the router when adding them to the Mesh network.

 

In case the method you've used really doesn't work, then try another one, for example WPS button method.

 

Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:Linking mesh extenders AC750 RE190-Solution
2023-09-18 17:23:36 - last edited 2023-09-26 08:01:49

  @Vikbe 

 

Hi,

 

Adding more extenders shouldn't be different than adding the first extender.

 

Where exactly have you got stuck in the process?

 

If the other extenders cannot be found, then maybe they are too far away? Place them near the router when adding them to the Mesh network.

 

In case the method you've used really doesn't work, then try another one, for example WPS button method.

 

Recommended Solution
  1  
  1  
#2
Options
Re:Linking mesh extenders AC750 RE190
2023-09-26 06:55:36

  @Vikbe 

Hi,

The steps to add a new device should be the same as before, make sure the device model is selected correctly on the Tether app, or you can use the WPS button

  0  
  0  
#3
Options