ER605 USB Modem and Wireguard

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 USB Modem and Wireguard

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 USB Modem and Wireguard
ER605 USB Modem and Wireguard
2023-10-01 01:35:39 - last edited 2023-10-12 01:20:15
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.2

I have got wired guard setup and working via the WAN Port although I cannot get it to work over the USB Modem.

 

I enter the USB Modem IP Address into

[Peer]

Endpoint = "USB Modem IP WAN Address"

 

And I am having not luck.

 

Althought I get a conneciton when on the WAN

 

I enter the USB Modem IP Address into

[Peer]

Endpoint = "WAN IP of WAN port"

 

I tried to reduced the MTU to 1360 which I read was an issue with a Teltonika modem although that didn't help.

 

Any assistance would be appriaceted.

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:ER605 USB Modem and Wireguard-Solution
2023-10-01 08:54:33 - last edited 2023-10-12 01:20:15

  @Andre_88 

Does your USB modem get a true public IP address ? or does your mobile network use CGNAT ?

If its the latter , then you'll not be able to connect

Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:ER605 USB Modem and Wireguard-Solution
2023-10-01 08:54:33 - last edited 2023-10-12 01:20:15

  @Andre_88 

Does your USB modem get a true public IP address ? or does your mobile network use CGNAT ?

If its the latter , then you'll not be able to connect

Recommended Solution
  0  
  0  
#2
Options
Re:ER605 USB Modem and Wireguard
2023-10-01 09:03:26

  @MisterW thank you, I was wondering if it was the sim. I used the APN given by the mobile provider for a public IP address. I will double check with them.

  0  
  0  
#3
Options
Re:ER605 USB Modem and Wireguard
2023-10-07 06:21:14

  @Andre_88 

 

You can refer to the official FAQ : https://www.tp-link.com/en/support/faq/3559/

You need to enter the WAN IP and the service port, maybe something like NAT caused this problem.

"SY" is a 22-year old boy presenting to the tp-link community with brain empty. Take care of yourself, and be well. Loycechan030
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 591

Replies: 3

Related Articles