OC200 CONTROLLER NOT APPEARANCE IN DEVICES LIST
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OC200 CONTROLLER NOT APPEARANCE IN DEVICES LIST. ANYBODY know what can be the problem?
the controller seem to work fine.
tnx
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
it's been a while since I used the oc200, but if I remember correctly it doesn't show in the device list.
- Copy Link
- Report Inappropriate Content
@MR.S. there is couple off video that shows the oc200 in the device list...I can't find any setup or direction how to do it.
- Copy Link
- Report Inappropriate Content
you will se it in client list.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
The OC200 does not appear with the rest of the Omada devices. It manages it's updates differently, and it's 'Connected' state is implied once you are able to login :)
As above, you'll see it's IP in the clients list handy if you left it on DHCP and want to access it locally...you can check what its IP is via the cloud.tplink service, and then directly connect via the LAN once the IP is known.
- Copy Link
- Report Inappropriate Content
Aviv_Malka wrote
@MR.S. there is couple off video that shows the oc200 in the device list...I can't find any setup or direction how to do it.
you watch a video that is installed with the software controller? that'll show the device in the client list. oc200 never shows in the list as far as I recall. if you log in it from a computer, that computer shows the icon but oc200 is not listed.
- Copy Link
- Report Inappropriate Content
@Tedd404 soory for the delay... i juts asked why i can't see the oc200 controller in the divice list ...i can se my switch and my ER605 but not the controller itself.
Tedd404 wrote
Aviv_Malka wrote
@MR.S. there is couple off video that shows the oc200 in the device list...I can't find any setup or direction how to do it.
you watch a video that is installed with the software controller? that'll show the device in the client list. oc200 never shows in the list as far as I recall. if you log in it from a computer, that computer shows the icon but oc200 is not listed.
- Copy Link
- Report Inappropriate Content
@Aviv_Malka The controllers dont show in the list, the controller settings are in the settings menu. It will show as a client if you are using DHCP. A neat trick if you need the ip, If your using a gateway or know the IP of any of your other devices, thier login screen will show what the controller IP is in a warning that informs you its being managed by the controler.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 969
Replies: 9
Voters 0
No one has voted for it yet.