"Longe range"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

"Longe range"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

"Longe range"

Blazebebe

2023-11-14 23:41:28 - last edited 2023-11-15 01:15:44

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-11-14

"Longe range"

2023-11-14 23:41:28 - last edited 2023-11-15 01:15:44

Bonjour à tous,

J'habite une ferme et j'ai besoin d'une connexion wifi pour mes onduleurs qui sont sur un hangar à +- 100m de ma maison.

Pourriez vous me conseiller une solution avec une antenne multidirectionnelle?
Et une solution avec une antenne directionnelle ? J'ai vu les CPE610, mais je ne comprends pas bien comment ça fonctionne.

Idéalement j'aimerais limiter les ondes pour ne par perturber les animaux (vaches laitières) d'oùm l'idée de travailler avec une antenne style CPE610.
Si je fais erreur, n'aillez pas peur de me le dire.

Je vous remercie d'avance,

François.

Hello everyone,

I live on a farm and I need a wifi connection for my inverters which are on a shed +- 100m from my house.

Could you recommend a solution with a multidirectional antenna?
And a solution with a directional antenna? I've seen the CPE610, but I don't really understand how it works.

Ideally I would like to limit the waves so as not to disturb the animals (dairy cows) hence the idea of working with a CPE610 style antenna.
If I'm wrong, don't be afraid to tell me.

I thank you in advance,

Francois.

1 Reply

Hank21

2023-11-15 07:51:05

Posts: 3673

Helpful: 718

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:"Longe range"

2023-11-15 07:51:05

Hello @Blazebebe,

For long-distance communication, we will recommend you to set a point-to-point connection.
Which means you will need two of CPEs plus one AP or wireless router and a clear line of sight.

The connection should be like Router----AP CPE)))(((Client CPE----Another AP.

One CPE should connect to the router in the main house to extend wireless signal to the other building, while the other CPE should be installed in the other building to receive the signal from the 1st CPE.
As the 2nd CPE will work under client mode which means to transfer wireless signal to wired signal, so it will not broadcast wireless signal.

If you need wireless signal in the other building, you need to connect another AP or wireless router after the 2nd CPE to broadcast Wi-Fi.

Here is the link you can check the products.

For more details about this application, you can refer to the link.

We have some articles and instructions that might be helpful:
Long-distance wireless connection concerns when using outdoor access point
How can I set up the AP + Client topology successfully

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

"Longe range"

"Longe range"

Information

Voters 0

Tags