Home Network CommunityRange ExtendersCan 2 devices of same model be added to the same network
Range Extenders

Can 2 devices of same model be added to the same network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can 2 devices of same model be added to the same network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can 2 devices of same model be added to the same network
Can 2 devices of same model be added to the same network
2023-11-25 16:05:11 - last edited 2023-11-27 08:14:47
Tags: #Installation #TP-Link ID Related
Model: RE200  
Hardware Version: V4
Firmware Version: 4

How to connect 2 devices of same model to the same network?

 

How to retrieve login password for the device?

  0      
0
#1
Options
1 Accepted Solution
Re:Can 2 devices of same model be added to the same network-Solution
2023-11-25 19:36:14 - last edited 2023-11-27 08:14:47

  @Sanskriti 

 

Hi,

 

The main router will identify each device by its MAC address. Every networking device that TP-Link manufactures is being given its own and unique MAC address.

 

You connect the second RE200 the same way you connected the first RE200.

 

If your RE200 is version V4, then when you logged into the RE200 for the first time after unpacking it would have asked you to set a login password of your own choice. (in other words, initially there is no password)
In case the password has been forgotten by the user, then the RE200 will have to be reset using the small "Reset" button. After that the RE200 will again ask the user to set a new password upon the first login.

 

Recommended Solution
  1  
1
#2
Options
1 Reply
Re:Can 2 devices of same model be added to the same network-Solution
2023-11-25 19:36:14 - last edited 2023-11-27 08:14:47

  @Sanskriti 

 

Hi,

 

The main router will identify each device by its MAC address. Every networking device that TP-Link manufactures is being given its own and unique MAC address.

 

You connect the second RE200 the same way you connected the first RE200.

 

If your RE200 is version V4, then when you logged into the RE200 for the first time after unpacking it would have asked you to set a login password of your own choice. (in other words, initially there is no password)
In case the password has been forgotten by the user, then the RE200 will have to be reset using the small "Reset" button. After that the RE200 will again ask the user to set a new password upon the first login.

 

Recommended Solution
  1  
1
#2
Options

Information

Helpful: 0

Views: 1059

Replies: 1

Tags

Installation TP-Link ID Related