Landline is not working

Landline is not working

Landline is not working
Landline is not working
2024-03-09 15:54:16 - last edited 2024-04-08 08:41:49
Model: TL-MR6500v  
Hardware Version: V1
Firmware Version:

Landline is not working,when call to this number it's showing as switched off but WiFi is working,several time and several sim used but no use 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Landline is not working -Solution
2024-03-12 01:42:51 - last edited 2024-04-08 08:41:49

  @Koppapa 

 

There could be several reasons why VoLTE is not working. Here are some troubleshooting steps you can try to resolve the issue:

1.Check network coverage: Ensure that you're in an area with good LTE coverage.

2.Enable VoLTE: Generally, you can find the VoLTE option on Advanced > Telephony > Telephony Mode. Make sure Telephony Mode is VoLTE and VoLTE is enabled on the same page.

3. Check network mode settings: Go to Advanced > Network >Internet page, make sure Network Mode is 4G Preferred, also try 3G Only for comparison if there is still 3G service in your area

4.Update your router's firmware and ensure it is using the latest firmware.

5.Test with another VoLTE device: Insert the same SIM card into another VoLTE-compatible device, such as a smartphone, and observe if you can make and receive VoLTE calls. Pay attention to the network type displayed during the call (e.g., 4G LTE, 3G, 2G) to determine if the issue is specific to your device or the network.

 

If the issue persists, please contact TP-Link Support and provide results of above troubleshooting steps.

If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Landline is not working -Solution
2024-03-12 01:42:51 - last edited 2024-04-08 08:41:49

  @Koppapa 

 

There could be several reasons why VoLTE is not working. Here are some troubleshooting steps you can try to resolve the issue:

1.Check network coverage: Ensure that you're in an area with good LTE coverage.

2.Enable VoLTE: Generally, you can find the VoLTE option on Advanced > Telephony > Telephony Mode. Make sure Telephony Mode is VoLTE and VoLTE is enabled on the same page.

3. Check network mode settings: Go to Advanced > Network >Internet page, make sure Network Mode is 4G Preferred, also try 3G Only for comparison if there is still 3G service in your area

4.Update your router's firmware and ensure it is using the latest firmware.

5.Test with another VoLTE device: Insert the same SIM card into another VoLTE-compatible device, such as a smartphone, and observe if you can make and receive VoLTE calls. Pay attention to the network type displayed during the call (e.g., 4G LTE, 3G, 2G) to determine if the issue is specific to your device or the network.

 

If the issue persists, please contact TP-Link Support and provide results of above troubleshooting steps.

If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 136

Replies: 1

Related Articles