Home

Forums

Stories

Knowledge Base

Business Community > Routers > Does MR400 work with ER605 on one of the WAN ports as Backup

< Routers

Does MR400 work with ER605 on one of the WAN ports as Backup

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Does MR400 work with ER605 on one of the WAN ports as Backup

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Nemoadest

2024-04-02 15:20:29 - last edited 2024-04-22 15:40:30

Posts: 6

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-03-03

Does MR400 work with ER605 on one of the WAN ports as Backup

2024-04-02 15:20:29 - last edited 2024-04-22 15:40:30

Model: ER605 (TL-R605)

Hardware Version: V2

Firmware Version:

Dear Support,

I am on the search for the go-to LTE Backup which is NOT a stick on the USB port because
I want to extend the bandwidth by an external antenna for 4G/4G+ NOT 5G.

I have a MR600 here which is working fine but does not have an option to work in bridge mode or some call it pure mode.

Therefore I have searched the net for an alternative. Now, I found some review of a MR400 which is capabable to do so.

As I am not a friend of Huawei XYZ and other no-names, I have searched hi and low for an alternative, but no luck.

Setup of ER605 is simple:

2 x ISP with fiber 1 GBit. One backs up the other. As there is no meter on the connections and an all-in price, I don't care about which connection is slightly better than the other.

But I need (or I want) is a proper backup by 4G(+) like I have on the MR600 with a data SIM by one of the typical providers in this region.

I have very good results on the MR600 without any doubt, but the ER605 dooes not accept it.

In short: My question is wether I should buy a MR400 to achieve my goal?

Best regards

1 Accepted Solution

Clive_A

2024-04-03 03:48:41 - last edited 2024-04-22 15:40:30

Posts: 5415

Helpful: 2591

Solutions: 1209

Stories: 0

Registered: 2023-06-09

Re:Does MR400 work with ER605 on one of the WAN ports as Backup-Solution

2024-04-03 03:48:41 - last edited 2024-04-22 15:40:30

Hi @Nemoadest

Thanks for posting in our business forum.

I think MR600 should do it.

Here, try to change the LAN IP of the MR600 to a different subnet and check if you can get a link working well.

Defaultly, they are on 192.168.0.1/24, I suppose. There should also be zero compatibility issues between them.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Does MR400 work with ER605 on one of the WAN ports as Backup

Does MR400 work with ER605 on one of the WAN ports as Backup

Information

Voters 0

Tags