MLO network broken for s 24u after update
MLO network broken for s 24u after update
My router just updated today to the latest firmware version and it broke the mlo network for my S24 Ultra. Where is constantly dropping connection from it. I try rebooting, factory resetting and even a firmware downgrade, but I get an error.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, is your MLO network settings exactly the same as that on previous firmware?
Please make sure the MLO network SSID is different from the main network, uncheck 2.4GHz for MLO network, then check if it would be stable.
- Copy Link
- Report Inappropriate Content
The error you're getting is most probably because you're not allowed to downgrade to a previous FW release from the curren one.
- Copy Link
- Report Inappropriate Content
@terziyski Ah, that's too bad, because the version before this one is more stable.
- Copy Link
- Report Inappropriate Content
That's just a suggestion because your FW version is not listed yet on the BE800 support portal. Which FW region your router is - you can check that on its bottom sticker.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
If you open the BE800 US support portlal - https://www.tp-link.com/us/support/download/archer-be800/v1/#Firmware
You won't see this FW release because it's a brand new - I assume you received it through a FW auto-update feature recently.
I assume that you own HW v1 - that's on the bottom sticker as well.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
When looking for your HW version the following rule applies:
Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28
So it's quite normal that these are the same FW releases as for HW v1.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Yes, you did it right - bottom sticker has precedence over other info (like the WebGUI). In your case though, it wouldn't matter.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 613
Replies: 16
Voters 0
No one has voted for it yet.