L2TP VPN Connection issue
Hi,
I have a TP-Link router (TL-ER7206) with L2TP VPN enabled behind my WAN internet router.
I would like to connect to my VPN from outside my LAN and to do this I have enabled port forwarding in my WAN router as per below (192.168.0.121 is the TP-Link router):
When I connect to the VPN from inside my LAN everything works correctly, but when I try to connect from outside, the connectivity gets stuck here:
Am I missing any other port in the list of the ports I need to forward?
Please let me know if you need more info.
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
This problem could be related to NAT-T in Windows. Check Google: NAT-T Windows 10/11
1) Open the registry editor in Windows. Select Start -> All Programs -> Accessories -> Run, then type 'regedit'.
2) Browser to registry subkey below. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PolicyAgent
3) Create a new DWORD (32-bit) registry value with the string below. AssumeUDPEncapsulationContextOnSendRule
4) Enable NAT-T for both devices located behind NAT. In the Value Data field, type '2'.
5) Restart Windows
Note. Meaning of value for the Value Data field.
0 - When both Omad and Client are not behind a NAT device.
1 - When Omada is behind a NAT device, but Client is not.
2 - When both Omada and Client are behind a NAT device.
- Copy Link
- Report Inappropriate Content
Hi @User52671
Thanks for posting in our business forum.
You can check this guide out.
Virtual Services(Port Forwarding) on the Router Doesn't Take Effect
It is not targeting your model but can give you some ideas in troubleshooting your modem router.
The ports are forwarded correctly. Nothing wrong with them.
However, you should check if your WAN is actually a public IP address.
- Copy Link
- Report Inappropriate Content
This problem could be related to NAT-T in Windows. Check Google: NAT-T Windows 10/11
1) Open the registry editor in Windows. Select Start -> All Programs -> Accessories -> Run, then type 'regedit'.
2) Browser to registry subkey below. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PolicyAgent
3) Create a new DWORD (32-bit) registry value with the string below. AssumeUDPEncapsulationContextOnSendRule
4) Enable NAT-T for both devices located behind NAT. In the Value Data field, type '2'.
5) Restart Windows
Note. Meaning of value for the Value Data field.
0 - When both Omad and Client are not behind a NAT device.
1 - When Omada is behind a NAT device, but Client is not.
2 - When both Omada and Client are behind a NAT device.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 406
Replies: 2
Voters 0
No one has voted for it yet.