Business Community > Gateways > High CPU and slow through-put
< Gateways

High CPU and slow through-put

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

High CPU and slow through-put

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
High CPU and slow through-put
High CPU and slow through-put
2024-07-29 15:55:13 - last edited 2024-07-30 01:09:02
Model: ER707-M2  
Hardware Version: V1
Firmware Version: 20240324

Just updated to a ER707-M2 from a Fortigate FG61F

Latest firmware loaded. 1.2.2 Build 20240324 Rel. 42799

Bottom of the unit says it's v1.6 but the gui shows v1.0. TP-Link has 2 download links for the different versions but they appear to be the same in this case.

 

Throughput seems slower than it should be. I was getting nearly a gig with my Fortigate FG-60F and at just 150Mbps of throughput the CPU is pegged at 100%

 

What am I missing? 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:High CPU and slow through-put-Solution
2024-07-29 16:12:45 - last edited 2024-07-30 01:09:02

  @DACZ 

 

try disabling IPS/IDS, the router is too weak for that.

Recommended Solution
  1  
  1  
#2
Options
Re:High CPU and slow through-put-Solution
2024-07-30 01:12:52 - last edited 2024-07-30 01:13:25

Hi @DACZ 

Thanks for posting in our business forum.

Common Questions About the Hardware Version and Firmware Update

 

About the throughput, the DPI or IDS will require the CPU to examine every packet pattern and signature.

The DPU cannot do this job so it is left idle. When you disable the DPI/IDS, you get DPU working again. So, the throughput looks much better.

Recommended Solution
  2  
  2  
#4
Options
3 Reply
Re:High CPU and slow through-put-Solution
2024-07-29 16:12:45 - last edited 2024-07-30 01:09:02

  @DACZ 

 

try disabling IPS/IDS, the router is too weak for that.

Recommended Solution
  1  
  1  
#2
Options
Re:High CPU and slow through-put
2024-07-30 00:06:21

  @MR.S

 

THANK YOU.... Yes that was it. Speedtesting went from 300M to 950M 

  0  
  0  
#3
Options
Re:High CPU and slow through-put-Solution
2024-07-30 01:12:52 - last edited 2024-07-30 01:13:25

Hi @DACZ 

Thanks for posting in our business forum.

Common Questions About the Hardware Version and Firmware Update

 

About the throughput, the DPI or IDS will require the CPU to examine every packet pattern and signature.

The DPU cannot do this job so it is left idle. When you disable the DPI/IDS, you get DPU working again. So, the throughput looks much better.

Recommended Solution
  2  
  2  
#4
Options

Information

Helpful: 0

Views: 951

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.