Almost everything stuck on "adopting"

Almost everything stuck on "adopting"

Almost everything stuck on "adopting"
Almost everything stuck on "adopting"
2024-08-06 19:58:45 - last edited 2024-08-15 08:37:36
Hardware Version: V1
Firmware Version: 5.14.26.23

So - A short while ago my Omada network seemed to lock up and ___ the bed. 

Gateway, switch, and two of three access points are now stuck on "adopting" (EAP225 / EAP245).

My EAP650 is "okay". 

 

I've just done the latest controller update, but no change. Rebooted / power cycled everything... no change. 

 

Things are still working in terms of internet traffic - but I can't manage the gateway, or the access points - I can't even pull up a web page on them (port scanned, nothing). 

 

There's nothing in the device logs. 

 

Is this basically just a case of reset everything and start again? 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Almost everything stuck on "adopting"-Solution
2024-08-06 22:00:10 - last edited 2024-08-15 08:37:36

  @JulesW 

 

i see the devices with problems have ip 192.168.21.x, the one that works has ip 192.168.23.x do you have a very large ip network or is there something else wrong.?

 

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Almost everything stuck on "adopting"-Solution
2024-08-06 22:00:10 - last edited 2024-08-15 08:37:36

  @JulesW 

 

i see the devices with problems have ip 192.168.21.x, the one that works has ip 192.168.23.x do you have a very large ip network or is there something else wrong.?

 

Recommended Solution
  0  
  0  
#2
Options