EAP225 stuck adopting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP225 stuck adopting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP225 stuck adopting
EAP225 stuck adopting
2024-02-20 12:44:09
Model: OC200  
Hardware Version: V2
Firmware Version: 2.11.3

We have 2 cases of 2 different Omada controllers that fail to adopt EAP225 v3. They constantly stay in status: Adopting but never get adopted.

EAP Version: 5.1.1
Omada SDN Controller Version: 5.12.9
Omada Controller Model: OC200 v2.0
Omada Controller Firmware Version: 2.11.3

I have searched for information about similar cases and I have found that with EAP225 version 5.0.5 something similar happened and it was because the communication ports between Omada Controller and EAP were changed, but in our case they are all open and belong to the same network.

Can you please help us?

  0      
  0      
#1
Options
2 Reply
Re:EAP225 stuck adopting
2024-02-21 03:46:26

@Newrest

 

Upgrade the EAP225's firmware to the latest one in standalone mode and then try to adopt for testing.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:EAP225 stuck adopting
2024-02-27 14:12:56

  @Newrest 

 

Topology between the Controller and the APs?  Do they have IPs from same subnet?

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#3
Options