Solution Disable NAT on Omada Router
Solution Disable NAT on Omada Router
This Article Applies to:
Certain Omada models.
Issue Description/Phenomenon:
In certain situations, especially, ISP provides a modem-router and intends to disable the NAT to eliminate the double-NAT problem.
Available Workarounds/Solutions:
Our team has developed an early firmware version to address the issue mentioned above.
Disable NAT function is developed on the recent firmware release:
For ER706W V1 based on 1.0.4, download here;
ER7206 V2 based on 2.1.2, download here.
More to come this month:
ER605 V2 based on 2.2.6, download here.
ER7206 V1 based on 1.4.2, download here.
ER8411 V1 based on 1.2.2, download here.
Note:
1. The firmware above only applies to the standalone mode.
2. Please be advised that if there are any delays or cancellations in the development progress, we will not provide notifications or explanations. Additionally, we do not offer any guarantees to their release before the actual development of firmware has been finished. For information on the final outcome, please refer to future updates on this thread.
3. For other models, the official fix/solution will be included in the upcoming V5.15.X Omada Controller and its associated firmware. We cannot provide a specific release date at this time.
Thank you for your attention!
Update Log:
Sep 20th, 2024:
Add ER605 V2 2.2.6.
Sep 14th, 2024:
Release of this article.
Feedback:
If this was helpful, welcome to give us Kudos by clicking the thumbs-up button below.
If the solution doesn't work for you, your case is probably different from what is described here.
In that case, please feel free to click Start a New Thread and elaborate on the problem so that we can try to help you further.
Thank you for your great cooperation and patience!
TP-Link Support Team
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
have you done this in standalone mode? do you have any screenshots of the configuration avaiable?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @W38122077
Thanks for posting in our business forum.
W38122077 wrote
have you done this in standalone mode? do you have any screenshots of the configuration avaiable?
For any of the new beta firmware of a feature, please check if it is compatible with your controller.
To learn if this is compatible with your controller or not, you should review the release note. If it is supported, you will have this option available and mentioned in the note.
If there is no mentioning about it, then it is not added or released.
- Copy Link
- Report Inappropriate Content
Thanks, but the link to the beta firmware for the ER8411 in the post was only to the bin file so there weren't any release notes to reference controller compatibility.
https://community.tp-link.com/en/business/forum/topic/702244
Is there somewhere where release notes are available?
Clive_A wrote
Hi @W38122077
Thanks for posting in our business forum.
W38122077 wrote
have you done this in standalone mode? do you have any screenshots of the configuration avaiable?
For any of the new beta firmware of a feature, please check if it is compatible with your controller.
To learn if this is compatible with your controller or not, you should review the release note. If it is supported, you will have this option available and mentioned in the note.
If there is no mentioning about it, then it is not added or released.
- Copy Link
- Report Inappropriate Content
Hi @W38122077
Thanks for posting in our business forum.
W38122077 wrote
Thanks, but the link to the beta firmware for the ER8411 in the post was only to the bin file so there weren't any release notes to reference controller compatibility.
https://community.tp-link.com/en/business/forum/topic/702244
Is there somewhere where release notes are available?
Clive_A wrote
Hi @W38122077
Thanks for posting in our business forum.
W38122077 wrote
have you done this in standalone mode? do you have any screenshots of the configuration avaiable?
For any of the new beta firmware of a feature, please check if it is compatible with your controller.
To learn if this is compatible with your controller or not, you should review the release note. If it is supported, you will have this option available and mentioned in the note.
If there is no mentioning about it, then it is not added or released.
The forum where you download the beta or the official website contains the release note. If the controller release note has not explicitly marked out that the Disable NAT is available, then there is no firmware available for adaption.
I have answered these questions. This is ONLY an early access firmware for people in standalone.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1650
Replies: 16
Voters 0
No one has voted for it yet.