EAP610 outdoor mesh to security camera
I have a EAP 610 outdoor. It is working great.
I need to add a non-wifi security IP camera at a location at the edge of the EAP's coverage.
I was thinking I could mesh in a second EAP 610 outdoor unit at this location and then plug the wired IP camera into the EAP. Not only would I extend the WiFi further, I would get a camera feed too.
Will this even work?. Can the Ethernet port on the meshed EAP be used for local wired connections like a bridge? Alternatively, can I plug a switch into the meshed EAP and network in multiple local devices?
I've been digging around for this answer but cannot find any information.
If the EAP cannot be used as a bridge, is there a tplink device better suited to do this?
Hi @dbgarlisch
Will this even work?. Can the Ethernet port on the meshed EAP be used for local wired connections like a bridge? Alternatively, can I plug a switch into the meshed EAP and network in multiple local devices?
>>>Yes and yes. You can do that.
How to Configure the EAP610-Outdoor in Repeater Mode
There is EAP610, maybe it's because you type a blank in between:
Hi @dbgarlisch
Will this even work?. Can the Ethernet port on the meshed EAP be used for local wired connections like a bridge? Alternatively, can I plug a switch into the meshed EAP and network in multiple local devices?
>>>Yes and yes. You can do that.
How to Configure the EAP610-Outdoor in Repeater Mode
There is EAP610, maybe it's because you type a blank in between: