Business Community > Controllers > Single Hardware controller for multiple sites
< Controllers

Single Hardware controller for multiple sites

Single Hardware controller for multiple sites

Single Hardware controller for multiple sites
Single Hardware controller for multiple sites
2024-11-06 13:42:29 - last edited Friday
Tags: #Controller
Model: OC200  
Hardware Version: V1
Firmware Version:

in the current configuration I am using one controller for each site. Instead of multiple controllers, Can I use single controller for multiple sites. Current configuration is as shown below

 

I would like to avoid procuring multiple controllers.

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Single Hardware controller for multiple sites-Solution
2024-11-07 07:19:01 - last edited Friday

Hi  @ravipati450 

 

Yes, below is the guide to manage multiple sites via one controller:

How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)

Recommended Solution
  0  
  0  
#3
Options
6 Reply
Re:Single Hardware controller for multiple sites
2024-11-06 14:09:54

  @ravipati450 

 

there is no problem to use one controller for multiple sites, but you should use OC300 or OC400 , OC200 is quite weak, I wouldn't use it on a single site even once.

 

 

  0  
  0  
#2
Options
Re:Single Hardware controller for multiple sites-Solution
2024-11-07 07:19:01 - last edited Friday

Hi  @ravipati450 

 

Yes, below is the guide to manage multiple sites via one controller:

How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)

Recommended Solution
  0  
  0  
#3
Options
Re:Single Hardware controller for multiple sites
2024-11-10 00:39:53

  @MR.S Is it need static IP??

  0  
  0  
#4
Options
Re:Single Hardware controller for multiple sites
2024-11-10 00:40:49

  @Vincent-TP Will it need static IP. With DHCP i am not able to discover the device.

  0  
  0  
#5
Options
Re:Single Hardware controller for multiple sites
2024-11-10 07:23:41

  @ravipati450 

no, I use no-ip and connect the remote site with fqdn, it works very well.

 

  1  
  1  
#6
Options
Re:Single Hardware controller for multiple sites
2024-11-11 02:29:08

Hi  @ravipati450 

 

Did you try MR.S suggestion? Did it work?

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 254

Replies: 6

Tags

Controller
Related Articles
multiple sites one software controller
1060 0
using cloud controller with multiple clients and sites
204 0
Omada Hardware Controller OC200 - Device does not exist
1305 0
SDN Hardware Controller upgrade (no Windows)
1044 0
Control multiple sites by one OC200
1120 0
LDAP configuration for OMADA Hardware Controller OC200 v1.0
176 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.