EAP655 VLAN question

EAP655 VLAN question

EAP655 VLAN question
EAP655 VLAN question
Yesterday - last edited 22 hours ago
Model: EAP655-Wall  
Hardware Version:
Firmware Version:

Hello,

 

I'm interested in the EAP655 Wall Plate, but I have a question.

 

If I assign a VLAN to a downlink ETH port, will it be tagged or untagged?

 

Can you help me? The device I need to connect to the ETH port doesn't support tagged VLAN.

 

 

Thank you very much

  0      
  0      
#1
Options
2 Accepted Solutions
Re:EAP655 VLAN question-Solution
Yesterday - last edited 22 hours ago

  @er2 Seems that's out of date

 

This is what it looks like on controller 5.14.x+ and 1.3:

 

Recommended Solution
  1  
  1  
#4
Options
Re:EAP655 VLAN question-Solution
22 hours ago - last edited 22 hours ago

Hi  @er2 

 

We can configure VLAN ID for the ETH ports.

If there is no tagged or untagged option, it will be untagged.  

It will work for your device.

Recommended Solution
  1  
  1  
#5
Options
5 Reply
Re:EAP655 VLAN question
Yesterday
Each port supports PVID, Untagged, and Tagged VLAN configuration. I just set the PVID for my basic devices connected (e.g., a printer) ... unsure if I need to also set something in untagged...
  0  
  0  
#2
Options
Re:EAP655 VLAN question
Yesterday

  @GoodOmens I can't find any tagged/untagged settings on the emulator page of the EAP655 GUI:

 

 

 

But I've just found this article, and it seems VLANs are always untagged: https://www.tp-link.com/en/support/faq/3312/

 

  0  
  0  
#3
Options
Re:EAP655 VLAN question-Solution
Yesterday - last edited 22 hours ago

  @er2 Seems that's out of date

 

This is what it looks like on controller 5.14.x+ and 1.3:

 

Recommended Solution
  1  
  1  
#4
Options
Re:EAP655 VLAN question-Solution
22 hours ago - last edited 22 hours ago

Hi  @er2 

 

We can configure VLAN ID for the ETH ports.

If there is no tagged or untagged option, it will be untagged.  

It will work for your device.

Recommended Solution
  1  
  1  
#5
Options
Re:EAP655 VLAN question
17 hours ago

 That's great.Thank you all for the information.

  1  
  1  
#6
Options