Business Community > Gateways > ER-605 SNMP Interfaces
< Gateways

ER-605 SNMP Interfaces

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER-605 SNMP Interfaces

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER-605 SNMP Interfaces
ER-605 SNMP Interfaces
2025-01-20 13:24:26
Tags: #SNMP
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.6 Build 20240718 Rel.82712

snmpwalk -v 2c -c public 192.168.16.1 1.3.6.1.2.1.2.2.1.2
iso.3.6.1.2.1.2.2.1.2.1025 = STRING: "default/lo"
iso.3.6.1.2.1.2.2.1.2.1026 = STRING: "default/eth0"
iso.3.6.1.2.1.2.2.1.2.1027 = STRING: "default/eth1"
iso.3.6.1.2.1.2.2.1.2.1028 = STRING: "default/ip6tnl0"
iso.3.6.1.2.1.2.2.1.2.1029 = STRING: "default/sit0"
iso.3.6.1.2.1.2.2.1.2.1030 = STRING: "default/gre0"
iso.3.6.1.2.1.2.2.1.2.1031 = STRING: "default/gretap0"
iso.3.6.1.2.1.2.2.1.2.1032 = STRING: "default/bond0"
iso.3.6.1.2.1.2.2.1.2.1033 = STRING: "default/veth0"
iso.3.6.1.2.1.2.2.1.2.1036 = STRING: "default/br-lan"
iso.3.6.1.2.1.2.2.1.2.1037 = STRING: "default/eth1.4094"
iso.3.6.1.2.1.2.2.1.2.1038 = STRING: "default/eth1.4093"
iso.3.6.1.2.1.2.2.1.2.1039 = STRING: "default/wg499088891"
iso.3.6.1.2.1.2.2.1.2.1040 = STRING: "default/wg1150023869"
iso.3.6.1.2.1.2.2.1.2.2049 = STRING: "vnet/lo"
iso.3.6.1.2.1.2.2.1.2.2050 = STRING: "vnet/ip6tnl0"
iso.3.6.1.2.1.2.2.1.2.2051 = STRING: "vnet/sit0"
iso.3.6.1.2.1.2.2.1.2.2052 = STRING: "vnet/gre0"
iso.3.6.1.2.1.2.2.1.2.2053 = STRING: "vnet/gretap0"
iso.3.6.1.2.1.2.2.1.2.2058 = STRING: "vnet/veth1"
iso.3.6.1.2.1.2.2.1.2.2059 = STRING: "vnet/eth0.1"

 

I got this list via SNMP but how do I know which port is what? The er605 has:
 

WAN #1
WAN/LAN1 #2
WAN/LAN2 #3
LAN1 #4
LAN2 #5
 

yes, but which one belongs to which of the above? Does anyone have an idea?

Thanks for the answers

  0      
 
  0      
 
#1
Options
10 Reply
Re:ER-605 SNMP Interfaces
2025-01-21 02:38:13 - last edited 2025-01-21 02:48:47

Hi @Melvinnbg 

Thanks for posting in our business forum.

br-lan contains the everything about the LAN.

eth0 and eth1 is the active WAN(dedicated).

 

  1  
  1  
#2
Options
Re:ER-605 SNMP Interfaces
2025-01-21 05:52:43

  @Clive_A 

 

Hello, thanks for the quick answer. This means that if I have two WAN ports occupied, I can check via eth0 and eth1 which one has how much upload/download and that for the two individually? Is this OID then for the bytes or for the packages in the download? 1.3.6.1.2.1.2.2.1.10

  0  
  0  
#3
Options
Re:ER-605 SNMP Interfaces
2025-01-21 06:04:14

Hi @Melvinnbg 

Thanks for posting in our business forum.

Melvinnbg wrote

  @Clive_A 

 

Hello, thanks for the quick answer. This means that if I have two WAN ports occupied, I can check via eth0 and eth1 which one has how much upload/download and that for the two individually? Is this OID then for the bytes or for the packages in the download? 1.3.6.1.2.1.2.2.1.10

Yes.

 

It would usually be bytes in statistics.

  1  
  1  
#4
Options
Re:ER-605 SNMP Interfaces
2025-01-21 08:04:02

  @Clive_A 

 

Thanks for the answer, I have the problem even though I only have one wan port occupied, it shows that both have traffic, what's wrong with that? An idea?

  0  
  0  
#5
Options
Re:ER-605 SNMP Interfaces
2025-01-21 08:13:36

Hi @Melvinnbg 

Thanks for posting in our business forum.

Melvinnbg wrote

  @Clive_A 

 

Thanks for the answer, I have the problem even though I only have one wan port occupied, it shows that both have traffic, what's wrong with that? An idea?

Screenshot of that?

Are they identical?

  0  
  0  
#6
Options
Re:ER-605 SNMP Interfaces
2025-01-21 08:35:18

  @Clive_A 

 

 

They are almost identical, it is also the case when both wan ports are active and go via the balancer, it is exactly the same as in the pictures. Is that normal?

 

 

  0  
  0  
#7
Options
Re:ER-605 SNMP Interfaces
2025-01-21 08:46:15

Hi @Melvinnbg 

Thanks for posting in our business forum.

Melvinnbg wrote

  @Clive_A 

 

 

They are almost identical, it is also the case when both wan ports are active and go via the balancer, it is exactly the same as in the pictures. Is that normal?

 

 

Are you using both WANs? Do you have the full print?

  0  
  0  
#8
Options
Re:ER-605 SNMP Interfaces
2025-01-21 08:54:50

  @Clive_A 

 




Both WAN ports are in operation. The load balancer is also set up. The command above then displays the output as in the previous post. I hope this helps.

  0  
  0  
#9
Options
Re:ER-605 SNMP Interfaces
2025-01-21 09:25:45

Hi @Melvinnbg 

Thanks for posting in our business forum.

Melvinnbg wrote

  @Clive_A 

 




Both WAN ports are in operation. The load balancer is also set up. The command above then displays the output as in the previous post. I hope this helps.

It could be the case that the SNMP gets the WAN adapter and it is giving the whole bandwidth status of the WANs. They should not be the same. I assume that's the case.

  0  
  0  
#10
Options
Re:ER-605 SNMP Interfaces
2025-01-21 09:35:14

  @Clive_A 

Okay, that means I don't have to query both, just one and then have the value for both WANs. Any idea why one shows it as an upload and the other shows almost exactly the same thing as a download?

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 570

Replies: 10

Tags

SNMP
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.