Business Community > Gateways > How to prevent VLANs to access WEB UI configuration
< Gateways

How to prevent VLANs to access WEB UI configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to prevent VLANs to access WEB UI configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to prevent VLANs to access WEB UI configuration
How to prevent VLANs to access WEB UI configuration
2025-02-10 18:49:24 - last edited 2025-02-11 01:10:40
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: LATEST

Hi,

 

I have 4 VLAN and would like to block 3 VLANs in order to no acess thew WEB UI configuration.

 

For example:

 

 

VLAN 10 -> 192.168.10.1

VLAN 20 -> 192.168.20.1

VLAN 30 -> 192.168.30.1

VLAN 40 -> 192.168.40.1

 

Would like to only VLAN 10 to acess 192.168.0.1, how can I proceed?

 

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:How to prevent VLANs to access WEB UI configuration-Solution
2025-02-11 01:10:36 - last edited 2025-02-11 01:10:40

Hi @chls_84 

Thanks for posting in our business forum.
Block the web management page whose ports are TCP 80 and 443.

 

If you are using the controller mode, you have the destination of the Gateway Management Page.

See the guide: ACL Guide Compilation

Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:How to prevent VLANs to access WEB UI configuration-Solution
2025-02-11 01:10:36 - last edited 2025-02-11 01:10:40

Hi @chls_84 

Thanks for posting in our business forum.
Block the web management page whose ports are TCP 80 and 443.

 

If you are using the controller mode, you have the destination of the Gateway Management Page.

See the guide: ACL Guide Compilation

Recommended Solution
  1  
  1  
#2
Options
Re:How to prevent VLANs to access WEB UI configuration
2025-02-11 17:53:29

  @Clive_A 

 

Hi,

 

Checked, but didn`t help!

I`m using in mode STANDALONE!

 

From example I`m connected to VLAN100 (192.168.100.2) and would like to access 192.168.100.1 but block access to webUI 192.168.0.1 and 192.168.200.1 (VLAN200).

 

Is it possible?

  0  
  0  
#3
Options
Re:How to prevent VLANs to access WEB UI configuration
2025-02-12 01:01:07

Hi @chls_84 

Thanks for posting in our business forum.

chls_84 wrote

  @Clive_A 

 

Hi,

 

Checked, but didn`t help!

I`m using in mode STANDALONE!

 

From example I`m connected to VLAN100 (192.168.100.2) and would like to access 192.168.100.1 but block access to webUI 192.168.0.1 and 192.168.200.1 (VLAN200).

 

Is it possible?

Create services TCP 80 and 443 and use them as the service in the ACL.

Like the first reply I explained how the web works and what you should do with the ACL.

  1  
  1  
#4
Options

Information

Helpful: 0

Views: 345

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.