Configuration Guide ACL Guide Compilation
Background:
This article lists all the common scenarios for the gateway ACL.
This Article Applies to:
All Omada routers with stateful Access Control(ACL).
User Case:
1. User’s Application Scenario Ⅰ: Only allow access internal network in Standalone
2. User’s Application Scenario Ⅱ: Only allow access internal network in Controller
3. User’s Application Scenario Ⅲ: Allow HTTP only and block all other services in Standalone
4. User’s Application Scenario Ⅳ: Allow HTTP only and block all other services in Controller
5. User’s Application Scenario Ⅴ: Unidirectional VLAN access in Standalone
6. User’s Application Scenario Ⅵ: Unidirectional VLAN access in Controller
7. User’s Application Scenario Ⅶ: Bi-Directional VLAN access in Standalone
8. User’s Application Scenario Ⅷ: Bi-Directional VLAN access and Only allow access the Internet in Controller
9. User’s Application Scenario Ⅸ: Only allow access the Internet in Standalone
10. How to Block Unwanted WAN IP Address from Your Server
11. How to Block One VLAN Interface From Your Gateway Page
12. How to Configure ACL to Block Unauthorized VPN Clients Bypassing the Portal
Appendix - Case Study:
1. Only Allow Access Internal Network (Including Remote Through VPN) on Some Device
Update Log:
Aug 30th, 2024:
Release of the article.
Recommended Threads:
How to Set Up VLAN Interface on the Omada Router
How to Configure GRE VPN on Omada Router
Feedback:
- If this was helpful, welcome to give us Kudos by clicking the upward triangle below.
- If there is anything unclear in this solution post, please feel free to comment below.
Thank you for your support and contribution to TP-Link Community!
------------------------------------------------------------------------------------------------
Have other off-topic issues to report?
Welcome to > Start a New Thread < and elaborate on the issue for assistance.