Home Network Community > Wi-Fi Routers > Ethernet-connected TL-WR902AC as a USB-connected Ftp Server with no WiFi connectivity.
< Wi-Fi Routers

Ethernet-connected TL-WR902AC as a USB-connected Ftp Server with no WiFi connectivity.

Ethernet-connected TL-WR902AC as a USB-connected Ftp Server with no WiFi connectivity.

Ethernet-connected TL-WR902AC as a USB-connected Ftp Server with no WiFi connectivity.
Ethernet-connected TL-WR902AC as a USB-connected Ftp Server with no WiFi connectivity.
2025-04-23 11:50:33 - last edited 2025-04-23 17:20:15
Model: TL-WR902AC  
Hardware Version: V1
Firmware Version: TBA

I am considering purchasing a TL-WR902AC to connect a USB drive to it and configure it as an Ftp server. I envisage connecting the WR902AC to an internet-connected router using an ethernet cable and will not require its wifi capabilites. How should I configure it so that it only connects to the internet router (BT Hub 2 - Full Fibre) using the ethernet port and to configure the usb drive attached to the WR902AC for Ftp access? I will not need either the Router-to-WR902AC wireless connection or the wifi extender functionality. Please advise if this possible and how I should configure the WR902Ac to achieve my aim, thank you. 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Ethernet-connected TL-WR902AC as a USB-connected Ftp Server with no WiFi connectivity.-Solution
2025-04-23 16:35:20 - last edited 2025-04-23 17:20:15

  @AlanC19hhg 

 

WR902AC-to-Intenet Router wireless link is possible in a Range Extender Mode but your inquiry was for an ethernet cable connection - that's AP mode.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#4
Options
4 Reply
Re:Ethernet-connected TL-WR902AC as a USB-connected Ftp Server with no WiFi connectivity.
2025-04-23 15:52:11 - last edited 2025-04-23 15:55:15

  @AlanC19hhg 

 

You could configure the WR902AC in AP mode and use its USB Sever in your LAN. Disable its wireless radio if it's not needed.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#2
Options
Re:Ethernet-connected TL-WR902AC as a USB-connected Ftp Server with no WiFi connectivity.
2025-04-23 16:25:16

  @terziyski 

 

I assume that there is no WR902AC-to-Intenet Router wireless link in AP mode then?

 

If that is so, that sounds like the exact configuration I am looking for provided I can turn off both of the connections.

 

Thank you, you're a star!     

  0  
  0  
#3
Options
Re:Ethernet-connected TL-WR902AC as a USB-connected Ftp Server with no WiFi connectivity.-Solution
2025-04-23 16:35:20 - last edited 2025-04-23 17:20:15

  @AlanC19hhg 

 

WR902AC-to-Intenet Router wireless link is possible in a Range Extender Mode but your inquiry was for an ethernet cable connection - that's AP mode.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#4
Options
Re:Ethernet-connected TL-WR902AC as a USB-connected Ftp Server with no WiFi connectivity.
2025-04-24 06:29:38

Hi@AlanC19hhg,

Thank you for reporting your need to our community.

If you want to try other operation modes of router in the future, you can refer to How to choose the right working mode for the Nano pocket routers

Check Out the Latest Posts: New Tether App - Provides Accessibility to Customize Settings to Fit Your Preferences Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router! Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 170

Replies: 4

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.