Business Community > Gateways > After restarting, all logs were deleted, and I could not disable only Interface Statistics
< Gateways

After restarting, all logs were deleted, and I could not disable only Interface Statistics

After restarting, all logs were deleted, and I could not disable only Interface Statistics

After restarting, all logs were deleted, and I could not disable only Interface Statistics
After restarting, all logs were deleted, and I could not disable only Interface Statistics
2025-05-21 02:48:32
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: V2 2.3.0 Build 20250410

Dear All,

I am using Standalone Mode.

My router struggled with PPTP continuously disconnecting and reconnecting to the PPTP server, causing the router CPU to remain at 100% and resulting in no internet due to the route table taking time when PPTP connected.

Recently, I upgraded to ER605 V2 2.3.0 Build 20250410. After restarting, all logs were deleted, and I could not disable only Interface Statistics but keep IP Statistics (they were disabled together).

I noticed that the real-time interface statistics do not work properly, as they are not showing data like packets, speed, etc.

----Issues Fixed----

Logging into the router when using Wireguard or L2TP only showed 192.254.22.11 or a similar address instead of the correct IP from the VPN IP pool assigned by the router (I think that is the tunnel bridge IP, but it affects the access control).

Thank you very much.

Best regards,

  0      
 
  0      
 
#1
Options
4 Reply
Re:After restarting, all logs were deleted, and I could not disable only Interface Statistics
2025-05-21 08:25:58

  @LeTuan 

Logs are deleted; this is expected behavior after the reboot.

Interface Statistics, not sure what you mean. If you mean the page where it counts all the traffic and data size, that cannot be disabled. If that's not the same thing, you may post a screenshot to illustrate what you mean.

  0  
  0  
#2
Options
Re:After restarting, all logs were deleted, and I could not disable only Interface Statistics
2025-05-21 10:53:56

  @Clive_A 

Interface Statistics—I'm not entirely sure what you mean.

1. As shown in this image, it appears there is no option to enable only Interface Statistics or only IP Statistics (they will come together).

2. The red-marked circle is either not displaying data or doing so randomly.

 

 

3. Another problem from this menu

 

 

  0  
  0  
#3
Options
Re:After restarting, all logs were deleted, and I could not disable only Interface Statistics
2025-05-22 01:03:12

  @LeTuan 

LeTuan wrote

  @Clive_A 

Interface Statistics—I'm not entirely sure what you mean.

1. As shown in this image, it appears there is no option to enable only Interface Statistics or only IP Statistics (they will come together).

2. The red-marked circle is either not displaying data or doing so randomly.

 

 

 

3. Another problem from this menu

 

 

 

That's the expected behavior. The two features are synced together.

 

For the other issue, try the incognito mode in Chrome. That seems to be a problem with the browser.

  0  
  0  
#4
Options
Re:After restarting, all logs were deleted, and I could not disable only Interface Statistics
2025-05-23 12:51:53

  @Clive_A I think that is not true, that function was on the V2_2.2.6 version. That one I can disable only 1.

 

This is problem because when I enable the IP Statistics, CPU will be used very high performance. It makes my router slower

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 280

Replies: 4

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.