Early Access EAP772v2 | EAP723v1 | EAP772-Outdoor V1 1.3.1 Pre-release Firmware (Update on 15th Jul, 2025)
This Article Applies To:
EAP772 V2, Fully Adapted to Omada SDN Controller v5.15 or above;
EAP772-outdoor V1, Fully Adapted to Omada SDN Controller v5.15 or above;
EAP723 V1, Fully Adapted to Omada SDN Controller v5.15 or above;
Release Notes:
New Feature/ Enhancement:
1. Added support for Radius logout and CHAP encryption in Standalone mode.
2. Added support for portal landing page selection in Standalone mode.
3. Added support for wired client traffic reporting of accelerated models.
4. Added support for modifying the Inform URL in SSH.
5. Modified the default list of NTP Servers.
6. Optimized the AP portal function.
7. Optimized the RA message processing of the IPv6 wireless air interface.
8. Optimized the configuration logic and improved the configuration efficiency.
9. Upgraded the OpenSSL library version to 1.1.1n.
10. Added the EAP power information to LLDP messages.
11. Updated the Uboot function.
12. Resolved the issue of high air interface occupancy rate in large-scale deployment scenarios.
13. Resolved the issue that modifying the PPSK without radius profile affected other SSIDs.
14. Support AFC for EAP 772V2(US) & EAP772-Outdoor(CA).
15. Supports custom Channel Range.
16. Supports New VI: Including New Logo, New Color Specifications and New Typography in Standalone Website.
For EAP772-Outdoor V1, the following new features have been added:
1. Supports displaying Configuration Result.
2. Supports cluster deployment in Controller mode (CBC does not support).
3. Supports Radius Proxy.
4. Supports OWE.
5. Supports custom Channel Range.
6. Supports upgrading firmware through cloud in Standalone mode.
7. Supports Portal Logout.
8. Supports disabling HTTP protocol in Standalone mode.
9. Supports DHCP Option43.
10. Supports multiple Radius Servers for MAC-Based Authentication.
11. Supports configuring NAS ID with WPA-Enterprise encryption.
12. Supports DNS Queries.
13. Supports configuring Rate Limit with Portal in Controller mode.
14. Supports configuring the Device Name in Controller mode, which can be carried in LLDP/SNMP/DHCP interaction.
15. Supports viewing status information and making some simple configuration through Standalone management page when the EAP is managed by the Controller and disconnected with Controller currently.
16. Supports displaying the maximum associated clients based on the EAP model in Controller mode.
17. Supports displaying the radio bandwidth of the EAP in Controller mode.
18. Supports configuring wireless mode in Controller mode.
19. Supports statistics of Multicast/Broadcast packets.
20. Supports 1024 PPSK entries.
21. Supports 802.11 a/n mixed in 5G.
22. Supports Non-stick Roaming function.
23. Supports authentication type of EKMS and Generic Radius with Unbound MAC for PPSK with Radius.
24. Supports Multicast Filtering with IPv6 address.
25. Supports reporting default OFDMA status.
26. Supports MAC Filter with 2000 entries per MAC Group profile.
27. Support DNS adoption.
28. Supports Multicast/Broadcast Rate Limit.
29. Enhances security protection.
30. Improves stability.
31. Improves support for more SSH commands.
32. Optimizes Automatic Power Optimization function.
33. Optimizes the configuration of Beacon Interval.
34. Optimizes roaming function.
35. Optimizes logs displayed in Controller.
Beta Firmware Download
Attention
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
EAP772 v2.0_1.3.1_20250715-rel43450 (Pre-release Version)
EAP723 v1.0_1.3.1_20250715-rel43450 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.1_20250715-rel43450 (Pre-release Version)
EAP772 v2.0_1.3.1_20250620-rel36729 (Pre-release Version)
EAP723 v1.0_1.3.1_20250620-rel36729 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.1-20250620_rel36729 (Pre-release Version)
EAP772 v2.0_1.3.0 (Pre-release Version)
EAP723 v1.0_1.3.0 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.0 (Pre-release Version)
Notes:
(1) Your device’s configuration won’t be lost after upgrading.
(2) The above firmware is fully adapted to Omada SDN Controller v5.15 and above
Update Log
5th Sep, 2025
Major Updates/Enhancements:
17. Fixed the registration issue for new AFC devices
18. Optimized the timeout duration for AFC queries
EAP772 v2.0_1.3.1_20250904-rel58599 (Pre-release Version)
EAP723 v1.0_1.3.1_20250904-rel58599 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.1_20250904-rel58599 (Pre-release Version)
15th Jul, 2025
Provide the following update:
EAP772 v2.0_1.3.1_20250715-rel43450 (Pre-release Version)
EAP723 v1.0_1.3.1_20250715-rel43450 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.1_20250715-rel43450 (Pre-release Version)
23th Jun, 2025
Major Updates/Enhancements:
1. Fixed the AFC issue.
EAP772 v2.0_1.3.1_20250620_rel36729 (Pre-release Version)
EAP723 v1.0_1.3.1_20250620_rel36729 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.1_20250620_rel36729 (Pre-release Version
4th Jun, 2025
Provide the pre-release link:
EAP772 v2.0_1.3.0 (Pre-release Version)
EAP723 v1.0_1.3.0 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.0 (Pre-release Version)
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
EAP772v2 | EAP723v1 | EAP772-Outdoor V1 1.3.1 Pre-release Firmware (released on 5th Sep, 2025)
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Having an issue with AFC after the upgrade. When i enable AFC it keeps showing as inactive.
- Copy Link
- Report Inappropriate Content
Hi @bramezan
Thanks for your feedback.
What is the model number and hardware version of the EAP you are using?
Is the EAP's Internet working normally?
Please also let us know the controller's firmware you are using. Thanks.
bramezan wrote
Having an issue with AFC after the upgrade. When i enable AFC it keeps showing as inactive.
- Copy Link
- Report Inappropriate Content
Controller version 5.15.20.39
EAP 772 v2 - 1.3.0
Everything was working great but after installing this update i noticed sometimes there is a 2-3 minutes pause where nothing works if connected to that AP.
- Copy Link
- Report Inappropriate Content
Will the EAP 772 v1 support AFC in the future?
Or it's EOL already?
- Copy Link
- Report Inappropriate Content
Hi @bramezan
Can the AFC be activated normally when the EAP network is functioning correctly? We want to know whether these two issues are related.
Regarding the WiFi pause issue, please give us more details:
1. When the issue happened, did the WiFi symbol disappear from the wireless clients? Or are they still connecting to the WiFi but showing No Internet?
2. How often will the issue happen?
3. How many EAP772 do you have in total? If you have more than one, will this happen on all of them? or just one?
4. When the issue happened, what's the LED status of the EAP772?
bramezan wrote
Controller version 5.15.20.39
EAP 772 v2 - 1.3.0
Everything was working great but after installing this update i noticed sometimes there is a 2-3 minutes pause where nothing works if connected to that AP.
- Copy Link
- Report Inappropriate Content
Can the AFC be activated normally when the EAP network is functioning correctly? AFC shows inactive at all times no matter if the wifi is working or not.
1. When the issue happened, did the WiFi symbol disappear from the wireless clients? Or are they still connecting to the WiFi but showing No Internet? No the client jumps to another EAP that I have which gives extremly low signal. That EAP is a 783.
2. How often will the issue happen? Every day. I have scheduled an auto reboot in the middle of the day which helps me not notice it as much but AFC still shows as inactive.
3. How many EAP772 do you have in total? If you have more than one, will this happen on all of them? or just one? I have 1 EAP 772 and 1 EAP 783
.
4. When the issue happened, what's the LED status of the EAP772? LED status light just shows blue.
- Copy Link
- Report Inappropriate Content
Hi @bramezan
Thank you for the info.
May we know what kind of controller you are using?
We recommend submitting a support ticket via email email for efficient assistance.
Please include the following information in the email:
1. this Forum ID 822442;
2. your community nickname;
3. The type of controller you are using and its config file
4. the device info of the EAP772 v2 (Site View > Device > choose the device > Config > Manage Device > Download Device Info > click Download)
- Copy Link
- Report Inappropriate Content
Many problems with v1 are described in this forum, but you do not fix these problems and provide streamlined formulations. Also, this is not a reason to transfer a NEW access point (which was released a year ago) to the outdated category and not add new features. In fact, with your posts in this forum topic, you reported the obsolescence of the v1(EOL).This is also confirmed by the pdf Document. As you can see, many of your customers have bought the first version and are using it with problem.
By treating your customers this way, you make them think about abandoning your company's equipment and switching to competitors all my projects. I am very sorry that I will have to migrate some of my infrastructure to your competitors and it is very good that I did not purchase much of your equipment.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Ive been working with support and they asked if i wanted to try the new beta as it would fix the issue I was having with AFC. I told them yes but was then told I would have to wait till they release it. Well it is released now but my issues wasn't fixed. It still shows AFC as inactive.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4801
Replies: 44
Voters 0
No one has voted for it yet.