EasyMesh AP - receive ack from server with ip

Macrox

2025-07-22 15:16:52 - last edited 2025-08-08 09:11:41

Posts: 21

Helpful: 67

Solutions: 0

Stories: 0

Registered: 2022-11-08

EasyMesh AP - receive ack from server with ip

2025-07-22 15:16:52 - last edited 2025-08-08 09:11:41

Model: Archer AX55

Hardware Version: V1

Firmware Version: 1.3.5 Build 20241211 rel.34816(5553)

In my AX55 (Easymesh AP), I am getting these logs every 30 seconds:

2025-07-22 10:12:25 DHCPC INFO [16142] receive ack from server with ip 192.168.0.3, options(serverid=192.168.0.1;lease=4294967295;subnet=255.255.255.0;dns=192.168.0.4 192.168.0.100;router=192.168.0.1;)
2025-07-22 10:12:25 DHCPC INFO [16142] send select request with options(cliid=01/6c:5a:b0:f9:2e:98:;)
2025-07-22 10:12:25 DHCPC INFO [16142] 1/2 lease passed, enter renewing state
2025-07-22 10:11:50 DHCPC INFO [16142] receive ack from server with ip 192.168.0.3, options(serverid=192.168.0.1;lease=4294967295;subnet=255.255.255.0;dns=192.168.0.4 192.168.0.100;router=192.168.0.1;)
2025-07-22 10:11:50 DHCPC INFO [16142] send select request with options(cliid=01/6c:5a:b0:f9:2e:98:;)
2025-07-22 10:11:50 DHCPC INFO [16142] 1/2 lease passed, enter renewing state
2025-07-22 10:11:15 DHCPC INFO [16142] receive ack from server with ip 192.168.0.3, options(serverid=192.168.0.1;lease=4294967295;subnet=255.255.255.0;dns=192.168.0.4 192.168.0.100;router=192.168.0.1;)
2025-07-22 10:11:15 DHCPC INFO [16142] send select request with options(cliid=01/6c:5a:b0:f9:2e:98:;)
2025-07-22 10:11:15 DHCPC INFO [16142] 1/2 lease passed, enter renewing state
2025-07-22 10:10:41 DHCPC INFO [16142] receive ack from server with ip 192.168.0.3, options(serverid=192.168.0.1;lease=4294967295;subnet=255.255.255.0;dns=192.168.0.4 192.168.0.100;router=192.168.0.1;)
2025-07-22 10:10:41 DHCPC INFO [16142] send select request with options(cliid=01/6c:5a:b0:f9:2e:98:;)
2025-07-22 10:10:41 DHCPC INFO [16142] 1/2 lease passed, enter renewing state

I use to have this problem before migrating to Easymesh, and it was fixed setting a static DHCP ip, but I can't do that anymore using Easymesh. Is there something I can do to avoid this and use my Main Router as DHCP server?

1 Accepted Solution

Joseph-TP

2025-07-23 06:30:21 - last edited 2025-08-08 09:11:41

Posts: 6453

Helpful: 464

Solutions: 2412

Stories: 0

Registered: 2024-06-22

Re:EasyMesh AP - receive ack from server with ip -Solution

2025-07-23 06:30:21 - last edited 2025-08-08 09:11:41

Hello@Macrox ,

Welcome to our community.

The router in AP mode cannot continue to handle DHCP services, that is, it does not assign IP addresses, but the main router handles these tasks.
So you need to go to the modem or router in front of Archer AX55 to complete the task of assigning a static IP.

Welcome to Community！ Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click △ Or ☆Recommended Solution if the post/answer helps.

EasyMesh AP - receive ack from server with ip

EasyMesh AP - receive ack from server with ip

Information

Voters 0

Tags