AP has a 60% Rx rate in 2.4 GHz band while no connected client in the same band
Hello,
In a building in which 50 APs are installed, I looked at an AP stats (EAP653 with 11.3 firmware).
I'm seeing that this AP :
has a low usage (3% in RX, 1% in TX) in 5 GHz band
has a high RX usage (>52%) in 2.4 GHz band
has a low TX usage (5%) in 2.4 GHz band
no connected guest in 2.4 GHz band
two connected guests in 5GHz band
How can I explain this high RX usage (>52%) in 2.4 GHz band ?
Best regards
Hi @Oliv2831
Thanks for posting here.
You are referring to the value on this page, right?
You may have a look to tthe following post to understand the situation:
EAP6110 went crazy, 50% network load, without any client
Hi @Oliv2831
Thanks for posting here.
You are referring to the value on this page, right?
You may have a look to tthe following post to understand the situation:
EAP6110 went crazy, 50% network load, without any client