Add Reboot, Force Sync/Provision, and Set InformURL Options in Local Web GUI for All Omada

Votes

Add Reboot, Force Sync/Provision, and Set InformURL Options in Local Web GUI for All Omada

Babun-Sikder

Monday

Posts: 125

Helpful: 80

Solutions: 7

Stories: 0

Registered: 2022-09-08

Add Reboot, Force Sync/Provision, and Set InformURL Options in Local Web GUI for All Omada

Monday

Dear TP-Link Omada Team,

I’d like to request TP-Link to add the following options in the local Web GUI for all Omada devices (Routers, APs, Switches):

Reboot
Force Sync/Provision
Set InformURL

At the moment, once a device is managed by the Omada Controller, we cannot adjust these settings locally. If a device loses connection with the controller or has the wrong InformURL, the only solution is to physically reboot or reset it.

Adding these options in the local Web GUI would make recovery and troubleshooting much easier, reduce downtime, and save unnecessary site visits.

2 Reply

Ethan-TP

Tuesday

Posts: 98

Helpful: 6

Solutions: 35

Stories: 0

Registered: 2025-09-08

Re:Add Reboot, Force Sync/Provision, and Set InformURL Options in Local Web GUI for All Omada

Tuesday

@Babun-Sikder

Thank you for taking the time to share your insights within the TP-Link Community. Your feedback is greatly appreciated and has been formally documented and escalated to our Product Development Division for thorough evaluation.

At this juncture, we are unable to confirm whether the requested enhancement will be implemented or to provide a definitive timeline. We appreciate your understanding of the complexities inherent in our product-planning and development cycles.

Should you have any further suggestions or additional context to offer, please feel free to share them here. All supplementary input will be consolidated and forwarded to the relevant teams for continued consideration.

Babun-Sikder

LV3

7 hours ago

Posts: 125

Helpful: 80

Solutions: 7

Stories: 0

Registered: 2022-09-08

Re:Add Reboot, Force Sync/Provision, and Set InformURL Options in Local Web GUI for All Omada

7 hours ago

@Ethan-TP

I have noticed that sometimes the device may get stuck. In such cases, having the Reboot, Force Sync/Provision, and Set InformURL options available in the local Web GUI would be a huge help for all network administrators.

These features would make it much easier to recover from unexpected issues without requiring a full reset or physical intervention, which is especially valuable in remote deployments.

Add Reboot, Force Sync/Provision, and Set InformURL Options in Local Web GUI for All Omada

Add Reboot, Force Sync/Provision, and Set InformURL Options in Local Web GUI for All Omada

Information

Voters 2

Tags