Business Community > Controllers > Issue with Switch Port Labels
< Controllers

Issue with Switch Port Labels

Issue with Switch Port Labels

Issue with Switch Port Labels
Issue with Switch Port Labels
Sunday
Tags: #Controller
Model: OC300  
Hardware Version: V1
Firmware Version: 1.31.9 Build 20251027 Rel.71780

I have begun to use switch port labels for grouping ports.  I have run into the same issue that I mentioned in a post a week ago in which I receive the message "Some tagged networks configured for the port do not exist".  This randomly occurs when creating a new label for a port or when trying to assign an existing label to a port.  The solution is the same workaround mentioned in my prior post which is to select "Allow All" for the Network Tags Setting and click Apply.  Then edit the setting again and select "Custom", delete the entries you don't want, and click Apply again.

 

It is a minor issue but it needs to be addressed and corrected.

 

1x ER7406 1x OC300 4x SG2008 1x EAP610 3x EAP650-Desktop
  0      
 
  0      
 
#1
Options
6 Reply
Re:Issue with Switch Port Labels
8 hours ago

Hi  @jra11500 

 

Thanks for posting here and thanks for your feedback.

Would you mind recording a video of this process? A video is worth a thousand words—it would help us understand the situation more intuitively. Thank you for your cooperation!

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#2
Options
Re:Issue with Switch Port Labels
6 hours ago

  @Vincent-TP 

 

I have never recorded a video of the computer screen but I will see what I can do.

 

1x ER7406 1x OC300 4x SG2008 1x EAP610 3x EAP650-Desktop
  0  
  0  
#3
Options
Re:Issue with Switch Port Labels
6 hours ago

  @jra11500 

 

I just thought i would give this a go

 

Things i tried to reproduce this

 

- Set up a port as access, non management native PVID, a couple vlans as tagged in "custom" mode

- Save the port without label

- Edit the same port, create a new label, and assign it

- Save the port

- Edit the port as native management, half of my vlans as tagged, delete the test label

- save the port

- edit the port, create a new test label and assign it

- save the port

- tried both the above with all "allow all" in tagged vlans

- tried the above with no tagged vlans, access port only

 

I tried this in both switch > manage device>ports and the new bulk port edit screen

 

I cannot replicate this!  As vincent said, a video would probably help!

 

  0  
  0  
#4
Options
Re:Issue with Switch Port Labels
5 hours ago

  @GRL 

 

I am on a learning curve WRT screen recording.  I am looking into this now and hope to post something shortly.

 

1x ER7406 1x OC300 4x SG2008 1x EAP610 3x EAP650-Desktop
  0  
  0  
#5
Options
Re:Issue with Switch Port Labels
4 hours ago

After eliminating all switch port labels, downloading and setting up OBS for screen recording, and starting to record the configuration steps, the issue has disappeared and all the previous labels were recreated without any problems.  Everything succeeded on the first try.  I am at a loss for an explanation but sometimes strange things just happen.

 

1x ER7406 1x OC300 4x SG2008 1x EAP610 3x EAP650-Desktop
  0  
  0  
#6
Options
Re:Issue with Switch Port Labels
3 hours ago - last edited 3 hours ago

  @jra11500 

 

Maybe some internal config stuff from beta1 to beta2 to release, resetting them all fixed it

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 60

Replies: 6

Tags

Controller
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.