Business Community > Switches > Omada SG_3 Series Pre-Release FW for SDN Controller 6.1.X.X (Released on March, 5th, 2026)
< Switches

Early Access Omada SG_3 Series Pre-Release FW for SDN Controller 6.1.X.X (Released on March, 5th, 2026)

12

Early Access Omada SG_3 Series Pre-Release FW for SDN Controller 6.1.X.X (Released on March, 5th, 2026)

Early AccessOmada SG_3 Series Pre-Release FW for SDN Controller 6.1.X.X (Released on March, 5th, 2026)
Omada SG_3 Series Pre-Release FW for SDN Controller 6.1.X.X (Released on March, 5th, 2026)
2025-12-31 06:06:33 - last edited 10 hours ago

This Article Applies to

 

SG3210(UN) 3.20
SG3210XHP-M2(UN) 3.0
SG3210X-M2(UN) 1.0
SG3218XP-M2(UN) 1.0
SG3428(UN) 2.30
SG3428MP(UN) 6.20
SG3428X(UN) 1.30
SG3428XF(UN) 1.20
SG3428X-M2(UN) 1.20
SG3428XMP(UN) 3.20
SG3428XMPP(UN) 1.0
SG3428XPP-M2(UN) 1.20
SG3452(UN) 1.20
SG3452P(UN) 3.30
SG3452X(UN) 1.20
SG3452XMPP(UN) 1.0
SG3452XP(UN) 2.20

 

Release Notes

 

Enhancement:

1.Optimize the client warning message prompt on the controller side.
 

Bug Fixes:

1. Fixed the low-probability port authentication exception issue during system upgrade scenarios.
2. Eliminated the risk of management instability when configuring multiple NTP servers.
3. Fixed the issue of unstable SSH connection.

 

Firmware Download

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Switches

 

Firmware Download Link

 

SG3210 V3.20 V3.20.18

SG3210XHP-M2 V3 V3.0.22

SG3210X-M2 V1 V1.0.20

SG3218XP-M2 V1 V1.0.20

SG3428 V2.3 V2.30.17

SG3428MP V6.20 V6.20.21

SG3428X V1.30 V1.30.18

SG3428XF V1.20 V1.20.17

SG3428X-M2 V1.20 V1.20.19

SG3428XMP V3.20 V3.20.22

SG3428XMPP V1 V1.0.17

SG3428XPP-M2 V1.20 V1.20.20

SG3452 V1.20 V1.20.18

SG3452P V3.30 V3.30.18

SG3452X V1.20 V1.20.19

SG3452XMPP V1 V1.0.16

SG3452XP V2.20 V2.20.21

 

 

Notes:

 

(1) The above firmware is applied to matching hardware.

(2) Your device’s configuration won’t be lost after upgrading.

 

Additional Information

 

All feedback is welcome, including letting us know about successful device upgrades.

If somehow you encounter an issue during or after the upgrade, it's suggested to contact us with the following info:

  • Omada Controller version if you have any.
  • Device Firmware version with Build number (previous and current)

 

If your model gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.

Configuration Guide How to Upgrade/Downgrade Omada Switches

 

Update Log

 

March, 5th, 2026

Release of this article.

 

Recommended Threads

 

Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]

 

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates Omada US Enterprise Beta Program Launch
  0      
 
  0      
 
#1
Options
18 Reply
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 6.1.X.X (Released on December 31th, 2025)-2
2025-12-31 15:05:40

  @Ethan-TP 

I'm still waiting for an update for the TL-SG3428XMP v2.0.

Is there any news about this device?
 
  0  
  0  
#2
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 6.1.X.X (Released on December 31th, 2025)-2
2025-12-31 16:17:59

  @Ethan-TP 

 

All my switches have been updated to this batch.  All my siwtches created ACL and IP Group configuration failures after the update.  "Apply Again" didnt clear them, but i was able to completely clear them by doing a Force Provision on every switch after the upgrade was complete.

 

This may be of use for other users

 

-ST

  0  
  0  
#3
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 6.1.X.X (Released on December 31th, 2025)-2
2026-01-01 04:32:42

  @Ethan-TP "Is there no update for the TL-SG3210XHP-M2 v1 as well?"

  0  
  0  
#4
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 6.1.X.X (Released on December 31th, 2025)-2
2026-01-07 09:26:17

  @pech 

There is currently no plan to release firmware for this model.

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates Omada US Enterprise Beta Program Launch
  0  
  0  
#6
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 6.1.X.X (Released on December 31th, 2025)-2
2026-01-07 09:26:30

  @RealQuality 

There is currently no plan to release firmware for this model.

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates Omada US Enterprise Beta Program Launch
  0  
  0  
#7
Options
Re:Omada SG_3 Series Pre-Release FW for SDN Controller 6.1.X.X (Released on December 31th, 2025)
2026-01-14 10:58:10 - last edited 2026-01-14 10:58:45

  @Ethan-TP Great updates so far in the new switch firmware.

We are successfully using SDM Template enterpriseMix to be able to configure IP Source Guard for IPv4 and IPv6 at the same time and also were able to switch to SNMPv3 with AES encryption instead of deprecated DES encryption.

 

One thing I noticed is that if you configure a RADIUS server for 802.1X in Security > AAA > Radius Config that the secret for the RADIUS server is shown in the clear and not replaced with * like if you define a password in User Management. In Controller Radius secret for a new server is also properly replaced with *. Is not a good practice to show passwords in Admin UI in clear in my opinion.

 

Switch: SG3452X 1.20 - Firmware 1.20.17 Build 20251226 Rel.60895

 

Best Regards,

Frank

 

 

  1  
  1  
#8
Options
Re:Omada SG_3 Series Pre-Release FW for SDN Controller 6.1.X.X (Released on January 28th, 2026)
2026-01-28 06:25:04

Experience the Latest Omada Switch Firmware - Trial Available Here, Subscribe for Updates!

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates Omada US Enterprise Beta Program Launch
  0  
  0  
#9
Options
Re:Omada SG_3 Series Pre-Release FW for SDN Controller 6.1.X.X (Released on January 28th, 2026)
2 weeks ago

@Ethan-TP 

 

When you have new firmware related to TL-SG3210XHP-M2 V2.0 version? Now I left this hardware haven't update to latest

  0  
  0  
#10
Options
Re:Omada SG_3 Series Pre-Release FW for SDN Controller 6.1.X.X (Released on January 28th, 2026)
2 weeks ago

  @Oscar521 

 

v2 of that switch seems to be EOL and is marked as so on the support sites.  Firmware TL-SG3210XHP-M2(UN)_V2_2.0.10 Build 20250121 is the latest one that i can see,  It may not get an update

  0  
  0  
#11
Options
Re:Omada SG_3 Series Pre-Release FW for SDN Controller 6.1.X.X (Released on January 28th, 2026)
2 weeks ago

  @GRL 

 

Because I need this switch to adapt to Omada version 6.1++ all of my devices is upgraded just left one of this.

 

My whole business network uses full Omada TP-Link Ecosystem, need make sure everything stay inline.

  0  
  0  
#12
Options
12

Information

Helpful: 0

Views: 2036

Replies: 18

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.