Solution Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]
Current Available Solutions
Upgrading the ER605 v2 firmware to 2.2.2, it may result some users would not be able to access their admin page due to the force redirection to HTTPS. As a new security fix on this version, the router will force to connect you to HTTPS. If you disabled the HTTPS before, you cannot access the page properly. View more >>
Upgrading the ER605 v2 firmware to 2.1.3 or 2.2.0 may result in the ER605 v2 entering a frequent "Disconnected" state from Omada Controller v5.9 or earlier versions. Though the internet still works, you cannot manage the router. TP-Link is actively investigating this matter to identify and resolve the underlying cause as quickly as possible. So far, a workaround has been provided to help temporarily fix this issue. View more >>
ER605 v2 2.2.0 firmware upgrade may cause OpenVPN failure issue with error "Common errors for VPN policies". TP-Link is actively investigating this matter to identify and resolve the underlying cause as quickly as possible. So far, a workaround has been provided to help temporarily fix this issue. View more >>
ER605 v1 1.3.0 firmware has added the detection and interception for TCP no-Flag attacks from the WAN IN direction, the detection is a bit frequent. You may ignore the excessive "TCP no-Flag attack" warnings until the future firmware optimizes the log event notification. Or disable the firewall settings of Block TCP Scan (Stealth FIN/Xmas/Null) if you prefer to just stop the router blocking the TCP no-Flag attack. View more >>
ER8411 v1 with 1.0.3 and earlier firmware may encounter NAT related issues, which could result in the failure of online multiplayer games, or fail to get the right access to the server. A Beta firmware has been provided as a quick solution to this specific issue. View more >>
ER605 v2 with 2.1.1 and 2.1.2 firmware may fail to work as a WireGuard VPN "Client" to make all the Internet traffic be routed through the VPN tunnel. A Beta firmware has been provided as a quick solution to this specific issue. View more >>
ER605 v2 with 2.1.1 and 2.1.2 firmware may generate lots of repeated event notifications of "[Gateway] was connected", sometimes with occasional disconnect notifications. A Beta firmware has been provided as a quick solution to this specific issue. View more >>
About This Post
This post will be actively updated to notify the current available solutions to Omada EAP related issues, welcome to subscribe!
To avoid bothering you with unrelated messages, this thread is locked. Any further questions or concerns related to Omada EAP series products, please feel free to start a new thread from HERE. To get better assistance from Community, you may check Tips For Efficiently Reporting an Issue In The Community.
How to Subscribe to a Post
Click on Options from the right top corner of the initial post, choose Subscribe and it's done!
*If you don't want to receive further notifications on this thread anymore, you can also choose Unsubscribe under Options.
How to Find the Recent or History Solutions Related to Omada Router Series Products
1. Visit the > Forum of Business Routers < from TP-Link Business Community.
2. Filter the posts by highlighting the Label with 'Solution' on the left panel of the forum as shown below, then all the solutions posted in the Business Routers forum will be listed on the right panel.