Early Access Omada SG_2 Series Pre-Release FW for SDN Controller 6.1.X.X (Released on March, 5th, 2026)
Early Access Omada SG_2 Series Pre-Release FW for SDN Controller 6.1.X.X (Released on March, 5th, 2026)
This Article Applies to
SG2005P-PD(UN) 1.0
SG2008(UN) 4.20
SG2008P(UN) 3.20
SG2016P(UN) 1.20
SG2210MP(UN) 4.20
SG2210MP(UN) 5.0
SG2210MP(UN) 5.6
SG2210P(UN) 5.20
SG2210XMP-M2(UN) 1.0
SG2218(UN) 1.20
SG2218P(UN) 1.20
SG2218P(UN) 2.0
SG2428LP(UN) 1.0
SG2428P(UN) 5.20
SG2428P(UN) 5.30
SG2452LP(UN) 1.0
Release Notes
Enhancement:
1.Optimize the client warning message prompt on the controller side.
Bug Fixes:
1. Fixed the low-probability port authentication exception issue during system upgrade scenarios.
2. Eliminated the risk of management instability when configuring multiple NTP servers.
3. Fixed the issue of unstable SSH connection.
4. Eliminated the risk of data conflict between POE and DDM data reading. (only SG2218P(UN) 2.0，SG2428LP(UN) 1.0)
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Switches
Firmware Download Link
Notes:
(1) The above firmware is applied to matching hardware.
(2) Your device’s configuration won’t be lost after upgrading.
Additional Information
All feedback is welcome, including letting us know about successful device upgrades.
If somehow you encounter an issue during or after the upgrade, it's suggested to contact us with the following info:
- Omada Controller version if you have any.
- Device Firmware version with Build number (previous and current)
If your model gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.
Configuration Guide How to Upgrade/Downgrade Omada Switches
Update Log
March, 5th, 2026
Release of this article.
Recommended Threads
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Ethan-TP Any chance of an update on SG_2210XMP-M2 pre-release FW update for Controller v.6.2.X.X?
Current version 1.0.20 Build 20260304 Rel.30262 are missing some wired client in the list of connected client. Although it seems to be cosmetic only (topology GUI and dashboard report on OC220 Controller 6.2 version 1.4.6 Build 20260228 Rel.41983) while connections are OK so far. LLDP Neighbour tables are also missing some of the wired clients under network view.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I can confirm the Wired Client list does indeed start losing clients (although they are fully connected and working) over a period of hours, from a list of my 26 standard devices it was reduced to just 9 over night (all the surviving entries on SG2428LP on the march firmware)
- Copy Link
- Report Inappropriate Content
I started to notice this problem yesterday when some of my clients were missing. Rebooting the controller seemed to fix the problem but today I again have missing clients on several of my SG2008 switches. Rebooting one of the switches has corrected the topology map for the clients wired to that switch. Later today I will look more into this issue and post the results here.
Update 24 hours later:
Initially in the topology map, two of four switches were not displaying the wired clients connected to the respective switches. One switch was rebooted and after 24 hours is still showing the wired clients correctly. The other switch, and now along with a third switch, have missing clients.
Both switches with missing clients have just been rebooted and the wired clients are now being displayed correctly. Monitoring will continue.
Latest Update:
After only an hour, the rebooted switches were not showing the wired clients in the topology map and the clients were not listed in the clients list. All switches have been successfully downgraded to firmware 4.20.17 Build 20260121 Rel.53429 and everything is back to normal. Of note, the downgrades were done in succession and at one point, the name of the main network PC in the controller’s client list was “forgotten” and replaced with its MAC address and had to be re-edited.
- Copy Link
- Report Inappropriate Content
I too have downgraded a couple critical switches to the January stable (20260121) and those do not produce the same wired client list issue as all the others on the March 4th build. What is super weird is that on the latest build, anything at all which causes a brief reconfiguration of the switch will make all the wired clients on it immediately vanish from the list, and it stays that way forever until you reboot the switch or the controller.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2199
Replies: 16
Voters 0
No one has voted for it yet.