Early Access Omada Switch Pre-Release Firmware Adapting to Omada SDNC 6.1.X.X (Released on December 31th, 2025)-1
This Article Applies to
SG2005P-PD(UN) 1.0
SG2008(UN) 4.20
SG2008P(UN) 3.20
SG2016P(UN) 1.20
SG2210MP(UN) 4.20
SG2210MP(UN) 5.0
SG2210MP(UN) 5.6
SG2210P(UN) 5.20
SG2210XMP-M2(UN) 1.0
SG2218(UN) 1.20
SG2218P(UN) 1.20
SG2218P(UN) 2.0
SG2428LP(UN) 1.0
SG2428P(UN) 5.20
SG2428P(UN) 5.30
SG2452LP(UN) 1.0
If your model is not listed, it is not supported in this batch. Please leave the model and version in the comment section;
Release Notes
New Features:
1. Add support for Type 8 (PBKDF2 with SHA-256) and Type 9 (Scrypt) password storage encryption type.
2. Add support for CPP (CPU protect policy).
3. Add support for MAC flapping.
4. Add support for packet capture.
5. Add support for ping and traceroute using domain names.
6. Add support for multiple RADIUS servers redundancy.
7. Add support for domain name RADIUS server.
8. Add support for RADIUS CoA & DM.
9. Add support for RADIUS accounting standard attributes Framed-IP-Address and Called-Station ID.
10. Add support for IGMP auto-elect and TCN flood for IGMP.
11. Add support for Syslog protocol, custom UDP ports, and transmission over UDP/TCP with DTLS or TLS.
12. Add support for LACP fast timeout.
13. Add support for deleting quadruple binding entries by port.
14. Add support for displaying user configuration information based on interface VLAN.
15. Add support for configuring DHCPv6 relay by port.
16. Add support for RadSec in 802.1X authentication.
17. Add support for log filtering based on keywords.
Enhancement:
1. Optimize MAC group.
2. Optimize the initialization process and remove default username and password.
3. Optimize interaction between 802.1X and VLAN.
4. Optimize DDM configuration display.
5. Optimize log display for STP root bridge changes.
6. Improve packet capture functionality.
7. Improve FDB table display.
Bug Fixes:
1. Fixed the issue of QoS anomalies in specific scenarios.
2. Fixed the issue of wired client list display issues in certain scenarios.
3. Fixed some security vulnerabilities related to interaction with Omada Controller.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Switches
Firmware Download Link
Notes:
(1) The above firmware is applied to matching hardware.
(2) Your device’s configuration won’t be lost after upgrading.
Additional Information
All feedback is welcome, including letting us know about successful device upgrades.
If somehow you encounter an issue during or after the upgrade, it's suggested to contact us with the following info:
- Omada Controller version if you have any.
- Device Firmware version with Build number (previous and current)
If your model gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.
Configuration Guide How to Upgrade/Downgrade Omada Switches
Update Log
December 31th, 2025
Release of this article.
Recommended Threads
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]
I just upgraded two of my four switches (SG2008 v4.20) and for the first time ever, I have the following messages in the logs under Configuration Result, Failed:
The Mid_port_1 message is repeated for the other 7 ports.
Update: After doing a Force Provision on each switch, the messages have disappeared and everything appears to be OK.
