Early Access Omada ES_Series Pre-Release Firmware for SDN Controller 6.1.X.X (Released on February 10th, 2026)
Early Access Omada ES_Series Pre-Release Firmware for SDN Controller 6.1.X.X (Released on February 10th, 2026)
This Article Applies to
ES205G(UN) 1.0
ES205GP(UN) 1.0
ES206GP(UN) 1.0
ES208G(UN) 1.0
ES208GP(UN) 1.0
ES210GMP(UN) 1.0
ES216G(UN) 1.0
ES220GMP(UN) 1.0
ES220GP(UN) 1.0
ES224G(UN) 1.0
ES228GMP(UN) 1.0
ES228GP(UN) 1.0
Release Notes
New Features:
1.Added support for HTTPS in standalone mode.
2.Added port name configuration in standalone mode.
3.Added support for EEE in controller mode.
4.Added support for clustering in controller mode.
5.Added support for LLDP global switch in both standalone mode and controller mode.
6.Added support for QoS rules in controller mode.
7.Added support for retaining partial standalone configurations such as IP and management Vlan when adopted by the controller.
8.Added support for device health in controller mode.
9.Added support for reporting port TX and RX rates in controller mode.
Enhancements:
1.Optimized VLAN configuration and port isolation in standalone mode.
2.Optimized basic QoS in standalone mode.
3.Added port-based loop detection switch in standalone mode.
4.Added Option 12 and Option 60 fields for DHCP.
5.Added Option 43 and DNS adoption to adopted method.
6.Enhance security.
7.Disabled IGMP snooping by default.
8.Added port-based fast leave for IGMP snooping in standalone mode and controller mode.
9.Added report suppression for IGMP snooping in controller mode.
10.Added port-based locate in controller mode.
11.Added encryption for configuration files in standalone mode.
12.Added login attempt limits in standalone mode.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Pre-release Firmware Agreement before upgrading the Beta firmware!
(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Switches
Firmware Download Link
Notes:
(1) The above firmware is applied to matching hardware.
(2) Your device’s configuration won’t be lost after upgrading.
Additional Information
All feedback is welcome, including letting us know about successful device upgrades.
If somehow you encounter an issue during or after the upgrade, it's suggested to contact us with the following info:
- Omada Controller version if you have any.
- Device Firmware version with Build number (previous and current)
If your model gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.
Configuration Guide How to Upgrade/Downgrade Omada Switches
Update Log
February 10th, 2026
Release of this article.
Recommended Threads
Omada_Network_Application_V6.1.x.x Pre-Release Firmware (Updated on 31st Dec, 2025)
Hardware Controllers Omada SDN Controller 6.1 Pre-Release Firmware (Updated on 31st Dec, 2025)
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I have just updated my 2 devices and they are now reporting health back to the software controller, but it did take a while to start populating.
I also noticed the IP addresses were missing for the clients and the topology was out of order. I rebooted the devices (not the controller) and everything came right.
@Hank21 do you know if the IES2xx switches will be getting a similar update in the future?
cheers
- Copy Link
- Report Inappropriate Content
@Hank21 @Vincent-TP Is this supposed to add IP addresses to the controller or no?
- Copy Link
- Report Inappropriate Content
@mackworth I do not think so. I installed the latest Controller 6.2.x and ER707-M2 1.4 for 6.2x Firmware and the latest ES Series firmware from the 10th of Feb and still Nothing....
- Copy Link
- Report Inappropriate Content
@TheMuk Yes, now that I investigate it I realize that change log references LLDP but that is only used for topology. We still need the ARP change.
- Copy Link
- Report Inappropriate Content
@mackworth @Hank21 @Vincent-TP There are for my after 3 years ONLY 2 thinks open:
1. The ARP update
2. QR codes and config file download for VPN ---> WirGuard and OpenVPN.
When that is done I am very satisfied!!!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1258
Replies: 16
Voters 0
No one has voted for it yet.