Business Community > Gateways > SD WAN connection failure
< Gateways

SD WAN connection failure

SD WAN connection failure

SD WAN connection failure
SD WAN connection failure
Yesterday
Tags: #VLAN & Multi-Networks #Network Connectivity #SD WAN
Model: ER706W-4G  
Hardware Version: V2
Firmware Version: 2.1.10

I have 3 ER706W-4G v2.0, one set as hub, and the other 2 set as spoke devices, but 1 spoke device is not connecting to the hub.

 

The following error messages appear in the log,

 

WAN2: Phase 1 of IKE negotiation failed. (Peers=210.xxx<->210.xxx, Error=NO_PROPOSAL_CHOSEN[14])

 

SD-WAN registration to hub failed.

 

Please help on the issues.

 

Thanks,

Alfred
 

  0      
 
  0      
 
#1
Options
3 Reply
Re:SD WAN connection failure
22 hours ago

Hi  @Alfred_DOMO 

You may refer to this guide firstly: How to Configure SD-WAN via Omada Controller

If the issue still persists, please provide us with the configuration screenshots for reference.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:SD WAN connection failure
21 hours ago

I have set up according to the guide.

 

The problem is that 1 spoke working, the other spoke not working, and all of them in the same firmware version.

 

Any other ideas?

 

Thanks,

Alfred

  0  
  0  
#3
Options
Re:SD WAN connection failure
18 hours ago

  @Alfred_DOMO 

 

Have you configured other IPSec tunnels that could create a conflict? If you have IPSec site to site to any of the sites that are part of the SD-WAN, these should be disabled.

 

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 58

Replies: 3

Tags

VLAN & Multi-Networks Network Connectivity
SD WAN
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.