Business CommunitySwitchesOmada Switch Pre-Release FW Preview for SDN Controller 6.2.X.X (Update on Apr, 29th, 2026)
Switches

Early Access Omada Switch Pre-Release FW Preview for SDN Controller 6.2.X.X (Update on Apr, 29th, 2026)

12345

Early Access Omada Switch Pre-Release FW Preview for SDN Controller 6.2.X.X (Update on Apr, 29th, 2026)

46 Reply
Re:Omada Switch Pre-Release FW Preview for SDN Controller 6.2.X.X (Update on Apr, 29th, 2026)
Yesterday - last edited 23 hours ago

Hi  @Julian2111 

 

Thanks for the feedback. Did restarting the gateway help?

Before updating to 1.20.21, what's the firmware version for the switch?

 

As for the firmware update issue, we will test more.

Julian2111 wrote

  @Vincent-TP I've deleted the rules and tried to update the switch, but whyever I can not update it. It says updating but after a few minutes the controller just shows "Connected", with the same firmware and says "failed to update device" without any further information. 

UPDATE: The updated worked, I just needed to restart the switch before.

Whyever mDNS is still not working, I will retry later rebooting the Gateway maybe a restart fixes things.

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Get the Latest Firmware Releases for Omada Routers Here< >Experience the Latest Omada EAP Firmware<
0
0
#44
Re:Omada Switch Pre-Release FW Preview for SDN Controller 6.2.X.X (Update on Apr, 29th, 2026)
Yesterday

Hi  @Spanky66 

 

Thanks for your feedback.

Are you trying to update to 1.20.24? Have you tried rebooting the switch? Did it help?

If not, please share with us the error message when update failed.

Spanky66 wrote

  @Vincent-TP Trying to update SG3210X-M2 V1.0 to 1.20.2 - using Firefox - latest Omada software controller 6.2.10.17

  Says that it upgraded, but version stays at 1.0.22 ?!? sad  Already updated my EAPs 787 & 773 without issue using same method

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Get the Latest Firmware Releases for Omada Routers Here< >Experience the Latest Omada EAP Firmware<
0
0
#45
Re:Omada Switch Pre-Release FW Preview for SDN Controller 6.2.X.X (Update on Apr, 29th, 2026)
9 hours ago - last edited 9 hours ago

  @Vincent-TP 

Are you absolutely sure that this change needed to be made:
Fixed the issue where SNMP nodes Q-BRIDGE-MIB and BRIDGE-MIB did not comply with protocol specifications.
Now 1.3.6.1.2.1.17.7.1.2.2.1.2 reads not ifIndex, as before, but the port number, which does not correlate in any way with the other SNMP branches that are accessed via ifIndex (which equals the port number + 49152). With all other vendors, ifIndex is read, and it’s unclear why this change was made.

0
0
#46
Re:Omada Switch Pre-Release FW Preview for SDN Controller 6.2.X.X (Update on Apr, 29th, 2026)
6 hours ago

  @Vincent-TP 

 

I too have had tons of trouble getting my switches updates with todays new builds, but eventually, after many attempts on several of them (SG3218XP-M2 was particularly difficult and needed multiple attempts and switch restarts) i have succeeded

1
1
#47
Re:Omada Switch Pre-Release FW Preview for SDN Controller 6.2.X.X (Update on Apr, 29th, 2026)
5 hours ago - last edited 5 hours ago

  @Vincent-TP 

I just want to let you know that I had no problems updating to the latest firmware SG3428X(UN)_V1.30_1.30.23 Build 20260423 on my TL-SG3428X and the update was successful on the first try.

 

I even restored it to factory settings after the update, set up again and everything went smoothly

 

Regards! yes

TRUST NO ONE, THE TRUTH IS OUT THERE!
1
1
#48
Re:Omada Switch Pre-Release FW Preview for SDN Controller 6.2.X.X (Update on Apr, 29th, 2026)
16 minutes ago

Hi  @zexoni70 

 

Thank you so much for your positive feedback.  

zexoni70 wrote

  @Vincent-TP 

I just want to let you know that I had no problems updating to the latest firmware SG3428X(UN)_V1.30_1.30.23 Build 20260423 on my TL-SG3428X and the update was successful on the first try.

 

I even restored it to factory settings after the update, set up again and everything went smoothly

 

Regards! yes

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Get the Latest Firmware Releases for Omada Routers Here< >Experience the Latest Omada EAP Firmware<
0
0
#49
12345
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.