Business CommunityGatewaysDCHP Resevrations import hangs
Gateways

DCHP Resevrations import hangs

DCHP Resevrations import hangs

DCHP Resevrations import hangs
DCHP Resevrations import hangs
Thursday
Tags: #DHCP Service
Model: ER707-M2  
Hardware Version:
Firmware Version:

ER707-M2 in standalone mode.

I have 80 DHCP reservations to import. 

I export the empty .CSV file - and then put my 80 entries (name, MAC, IP) into the file after the header - creating a file with 81 lines.  I am only filling colums A,B, and C - the rest are blank. 

 

I then import that file after saving in CSV format.  

Import says " Note: If Export to IP-MAC Binding is selected, the import may take a long time (up to 30 minutes)."   OK - not exactly sure what that menas but I waited. Overnight. Still trying to import and clearly not working. 

Anyone experienced this? Any tips welcome. Thanks. 

0
0
#1
5 Reply
Re:DCHP Resevrations import hangs
Thursday

  @grahamk The upload likely failed but did not alert. Ensure the MAC format you are using is XX-XX-XX-XX-XX-XX with dashes in between each pair of characters. 

Also, what firmware and hardware version is your device? 

Check out our subreddit, r/Omada_Networks! Want to help test and give feedback on new products? Sign up for the US Enterprise Beta Program here! Need a ticket? Contact Technical Support
0
0
#2
Re:DCHP Resevrations import hangs
Thursday



ER707-M2 v1.30

1.4.1 Build 20260325 Rel.78146

Thanks - I did replace all the ":" with "-"  My format looks like this - of course it's hard to copy/paste - but I am only filling in the first 3 cells - do i need to put something in all of them?

 

Network Name MAC IP Option60 Option66 Option138 Option150 Option159 Option160 Option176 Option242 Status Export to IP-MAC Binding Description
Kohler Anthem Controller  94-B2-16-13-FF-D0  192.168.1.50

 

                    
0
0
#3
Re:DCHP Resevrations import hangs
Thursday - last edited Thursday

  @grahamk You should only need to fill the first three columns, but that first column should be the name of the LAN you're putting the reservation on, not the device name. The device name can go in a Description column if there is one (don't have an ER707-M2 on me at the moment).

Check out our subreddit, r/Omada_Networks! Want to help test and give feedback on new products? Sign up for the US Enterprise Beta Program here! Need a ticket? Contact Technical Support
0
0
#4
Re:DCHP Resevrations import hangs
Friday

 

Thanks - I have narrowed my file to one entry and tried so many combinations now I think it is just broken.  If anyone happens to have a csv file that is known to work please send it to me. :-) 

This is a difficult thing to test because once I start an import the system enters a situation where a new one cannot be started, and it needs to be rebooted to try again.  :-|

0
0
#5
Re:DCHP Resevrations import hangs
Friday

  @grahamk Here's the one I used when testing (not a real MAC address but the format is correct), though this was used in Controller mode for a different model. Maybe try this one? 

Having issues uploading the file itself, but this is a CSV file with everything after the 4th column empty.

Check out our subreddit, r/Omada_Networks! Want to help test and give feedback on new products? Sign up for the US Enterprise Beta Program here! Need a ticket? Contact Technical Support
1
1
#6

Information

Helpful: 0

Views: 125

Replies: 5

Tags

DHCP Service
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.