RE330 setup problem

RE330 setup problem

RE330 setup problem
RE330 setup problem
Wednesday - last edited Thursday
Model: RE330  
Hardware Version:
Firmware Version:

Have just purchased this item.

The set up is easy however when moved more that about 20 feet from the modem the signal LED is showing red.

Is this normal?

0
0
#1
1 Accepted Solution
Re:RE330 setup problem-Solution
Wednesday - last edited Thursday

  @bill-lancaster 

 

Hi,

 

It depends. If it's just 20 feet of air, then it is not normal. But if there was a reinforced concrete wall between router and extender, then it could be normal.

Recommended Solution
2
2
#2
3 Reply
Re:RE330 setup problem-Solution
Wednesday - last edited Thursday

  @bill-lancaster 

 

Hi,

 

It depends. If it's just 20 feet of air, then it is not normal. But if there was a reinforced concrete wall between router and extender, then it could be normal.

Recommended Solution
2
2
#2
Re:RE330 setup problem
Thursday

Thanks woozle,

 

My TL-WPA4220 was working at about 50 feet from the modem for some years.

 

I was hoping that a more modern device would be just as good.

 

I'll just have to try to get the WPA4220 working or perhaps buy a new one.

 

Thanks again

0
0
#3
Re:RE330 setup problem
Thursday
So the RE330 doesn't get its signal through the wiring! That explains it, thanks
0
0
#4