CPE210/510 WebServer MAC authentication fail?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE210/510 WebServer MAC authentication fail?
Model :
Hardware Version :
Firmware Version :
ISP :
..so I was testing this added layer of authentication security found in the management tab of the web interface.
The User Guide explains, p85 "Enable this function to allow PCs with specific MAC addresses to access the web management page. And then enter each MAC address in the MAC field. The format for the MAC addresses is XX-XX-XX-XX-XX-XX. Only the PCs with the MAC addresses listed can use the password to access the device's web management page and the others will be blocked. By default, the function is not enabled. All the PCs in the local area network are allowed to access the device's web management page.
Click Add PC’s MAC, your PC’s MAC address will be added in the list above. Click Apply to save your settings."
I therefore input 4 different MAC addresses of my wireless and ethernet interfaces of my laptop locally - workstation remotely and applied the settings...and now find myself unable to login to the web interface both locally and remotely..something I'm missing?
:confused::mad:
Hardware Version :
Firmware Version :
ISP :
..so I was testing this added layer of authentication security found in the management tab of the web interface.
The User Guide explains, p85 "Enable this function to allow PCs with specific MAC addresses to access the web management page. And then enter each MAC address in the MAC field. The format for the MAC addresses is XX-XX-XX-XX-XX-XX. Only the PCs with the MAC addresses listed can use the password to access the device's web management page and the others will be blocked. By default, the function is not enabled. All the PCs in the local area network are allowed to access the device's web management page.
Click Add PC’s MAC, your PC’s MAC address will be added in the list above. Click Apply to save your settings."
I therefore input 4 different MAC addresses of my wireless and ethernet interfaces of my laptop locally - workstation remotely and applied the settings...and now find myself unable to login to the web interface both locally and remotely..something I'm missing?
:confused::mad:
Now serving finite customer via f(x)=AirTime/∞ on the 5Ghz band :-/
