Using a cpe510 and eap110

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Using a cpe510 and eap110

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Using a cpe510 and eap110
Using a cpe510 and eap110
2017-10-08 10:44:06
Model : CPE510

Hardware Version : Not Clear

Firmware Version :

ISP :

I am wanting to set-up a point to point 5Ghz link with the cpe510 between 2 buildings. My main question is, once i have configured this setup can i add an eap110 to use the 2.4ghz range as a wireless access point on the building i am sending signal. was told this can be done as by using the point to point in 5ghz it does not get interference from the 2.4Ghz range.
  0      
  0      
#1
Options
1 Reply
Re:Using a cpe510 and eap110
2017-10-08 16:15:29
Sure, you can do it this way. See recent forum threads here describing such scenarios in greater detail.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options