CPE510 actual throughput?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE510 actual throughput?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE510 actual throughput?
CPE510 actual throughput?
2017-10-16 18:06:42
Model :

Hardware Version :

Firmware Version :

ISP :

Hi,

I know it's not possible to give exact numbers and that local conditions will have an effectbut, is it possible to give some idea of the actual throughput I might expect from a pair of CPE510s placed about 100 metres apart with clear line of sight and a clear Fresnel zone?

There's no other 5 GHz equipment in use nearby.
  0      
  0      
#1
Options
4 Reply
Re:CPE510 actual throughput?
2017-10-18 01:35:42

K-Net wrote


I know it's not possible to give exact numbers and that local conditions will have an effectbut, is it possible to give some idea of the actual throughput I might expect from a pair of CPE510s placed about 100 metres apart with clear line of sight and a clear Fresnel zone?


Wireless throughput between the two CPE510 unidirectional:





Wireless throughput between the two CPE510 bidirectional:





Data throughput between devices connected to the CPE510:





All measurements have been done using iperf.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:CPE510 actual throughput?
2017-10-18 06:32:03
i.e. ~12.5MB/s (100mbps)
Now serving finite customer via f(x)=AirTime/∞ on the 5Ghz band :-/
  0  
  0  
#3
Options
Re:CPE510 actual throughput?
2017-10-18 19:39:07

R1D2 wrote

Wireless throughput between the two CPE510 unidirectional:





Wireless throughput between the two CPE510 bidirectional:





Data throughput between devices connected to the CPE510:





All measurements have been done using iperf.


Thank you very much for taking the time to run these tests and post the results :)

Those speeds are close to what I was hoping for as a maximum (100 mbps) and better than my required minimum (80 mbps ) - I'm off to order a pair now.

Thank you again :)
  0  
  0  
#4
Options
Re:CPE510 actual throughput?
2017-10-19 05:04:13

RTouris wrote

i.e. ~12.5MB/s (100mbps)


Correct, but if true full-duplex is enabled, it yields ~22 to 24 MB/s at 200 Mbps (100BASE-TX allows FD mode with simultaneous sender/receiver @ 100 Mbit/s each). That's why the CPE is designed to send up to ~200 Mbit/s at the wireless side, which is always half duplex.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1133

Replies: 4

Related Articles